Well, I would have called Brian if there were some others interested. I don't like to go out without 3 or 4 rigs. Oh well... I did call Chad (he's not on here)...
Got a question... Is replacing the D44 pinion seal as easy as it seems? Remove yoke nut, remove yoke, remove seal, new seal, replace yoke, re-torque nut? If...
Don't know the torque setting, but I just put a line across the nut and threads with a yellow marker crayon before removing the nut, then tighten it back to...
I still have a rear D44 for sale. It's out of an MJ, so is 5 on 4.5" bolt pattern and will fit a Wrangler or Cherokee. This is an easy upgrade for anyone with...
I will be there! ... From: Christina Mcafee To: bakersfieldtrailblazers@yahoogroups.com Sent: Wednesday, July 05, 2006 9:50 AM Subject: Re: [Bakersfield...
i have a 1981 cj 7 w/tune port 350. i have a problem, when the jeep bounces alot the mass air flow meeter shorts. i'm wondering if there is a way to install...
I think you can get thespecs from randy ring and pinion. http://www.ringpinion.com/ ... From: Jeff To: bakersfieldtrailblazers@yahoogroups.com Sent: Monday,...
Click here: http://www.pirate4x4.com/tech/billavista/PDFs/Dana_light_axle_service_manual.pdf here is a link to a Dana small axel service manual. Kerry Hall...
Fun Run... Those of you that want to get out of the heat, we plan on going to(above)shaver lake this week end. We plan on doing patterson mountain. It is class...
Sitting there on the northbound side without it's Drivers rear tire/wheel/axle. Guess what came flying at me last night on my way home from work at about...
There are going to be Jeeps from other areas up there as well. ... From: Kerry <khall@...> To: bakersfieldtrailblazers@yahoogroups.com Sent: Tuesday,...
Sometimes on dana 44 axles the bearing retainer will work loose. It allows the axle to slip through and come out and the wheel still attactched to the axle to...
Tire with Axle still attached! Good Times! ... From: Kerry Hall <khall@...> To: bakersfieldtrailblazers@yahoogroups.com Sent: Tuesday, July 11, 2006...
That was a Dana 35 in that YJ, the whole thing comes out when the axle breaks, or if the c-clip fails. You get the wheel, tire, brake drum, axle all loose and...
Does anyone have a tubing bender (1.75" x 0.25" wall DOM) that I could borrow/rent/have you use to make two hoops? Alternatively, does anyone know of a place...
Mike, I know Rodney has a tube bender..... dont know if it is what you need, but you could call him. DAWNETT [Non-text portions of this message have been...
I just listed take-offs from my Raggedy Red Revival project on eBay: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250007326642 Mike Kunz If...
I think you are gonna be out of luck on that one. Mass air flow sensors and map sensors are two totally differnt fuel injection strategies. Unless you changed...
mike, will these mount to my 72 304 v-8? how many speeds is tranny? all my drive train is factory so for all i know this may be identical to what i have. my...
The trans is a three speed. Should mount to early Jeep motors, including the 304 and 401. If yours is broke and you want to fix it cheap, this would be a...
Mike, I'm picking up a bender and starting to bend tube for my buggy this weekend. The bender that I'm borrowing has 2", 1.5",and 1" dies, but I'm buying them...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
