I was origionally going to use the efi on my motor but now I want to change to carb'd. I cn do the wiring myself on the carb'd stuff. What vehicles had a...
My 82 Phoenix with the 2.5 is EFI and computer controlled. It may have been the first year in the X-body that was EFI. Can't say for the S-10. Darrell ... ...
the 82 to 84 S10s were carbed, but the 2.5 with a carb was used in everything from Jeeps to the Chevy Celebrity. ... From: Dan <j354_1042fromfcj@...>...
So I get a great deal on this 81 Jeep with the duke in it, purchase the harness and the chip from affordable fuel injection and bolt up the intake and TBI unit...
I have a 1984 Pontiac Fiero and one of the push rods broke near the cam that actuate the rocker arms, is there an easy fix or do I have to pull(drop) the...
I followed a similar route with my 80 Jeep. Once I got the bugs worked out, the results have been fantastic. No more flooded carb in the middle of a difficult...
I did not see that you changed the fuel pressure regulator or cleaned the air idle control valve. If it is running ritch then you could have the wrong FPR in...
Dude, sounds like you have a real mess there... Ok... first things first, how's vacuum, what do the plugs read? And double check that distributor swap, you...
Distributor? ... From: bj_fabian11 <bj_fabian11@...> Subject: [AKX's Iron Duke Tech 4 Garage] what goes here? To: akxsironduketech4garage@yahoogroups.com...
OK guys. So I have a 90 Cutlass Ciera with the 2.5 in it. It is a good running car, except it sometimes has a misfire that I've not been able to track down. It...
I have asked myself that several times so I pulled the head to see if there was any exesive carbon build up etc, and it all looks good.I used a rare earth...
Hey guys, im Josh and i just joined the group. I am about to buy an 89 S10 that has been modded into a convertible, the guy did a beautiful job on the outside...
Anyone good with wiring on the iron dukes? I have my horn out, my tach and oil pressure guage out and my instrument lights out. Connected the horn to the...
can someone post pics of a 151 iron duke setup in a 1981 or earlier cj? cj5s and cj7s have the same setup i think. that would help me a ton sence i just...
Odd... I responded to this question already, but it didn't seem to take. Yes, the distributor goes there. ... From: Paul Fox <paulvair@...> Subject: Re:...
First things first... do you have power to the fuse block on all connects? ... From: Charlie G. <livedj11@...> Subject: [AKX's Iron Duke Tech 4 Garage]...
Hey all, this is my first post here. Thanks for letting me join, I'm enjoying reading the old posts now. I'm no stranger to auto forums, and frequent...
... The stock crank will fly apart at 150hp, its trash. A marine 3.0 crank(with some machining, although I dont think it will work in a FWD) will hold up to...
Check out this link: http://ironduke7.tripod.com/IronDuke.htm It tells the difference in the duke motors that were were built, like the marine block or postal...
Ok thanks for the info. I had forgot I'd joined and posted that message! It's sad that these are so weak compared to the V6 engines. You can boost them hard...
Start with the S-10 block. They're stronger. You will have to address detonation as well. the Duke is prone to it any way. The turbo will only make it worse. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
