Take the exhaust pipe off, and dump out the fuel, then check the reeds to make sure they are closed, not bent slightly open. ... From: tim pearce To:...
Just one more thing. I don't know your age and experience with these big two strokes. Be careful . These are powerful machines.When they are running right they...
At a second listen,, definitely take the silencer off and see if that helps. Sometimes you can just take the core out. I recently took mine out and cleaned it....
Did you check any of the things I listed yet. It still could go either way, rich/ lean. Check the plug to see if it's wet. It's not bellowing smoke so I want...
ok, took a vid and posted it on youtube. Hard to do, so there are a few bits when the camera is in my pocket. The riding pieces are at 3/4 to full throttle. As...
got a web cam? then we can hear it..LOL ________________________________ From: idit465 <idit465@...> To: YamahaIT@yahoogroups.com Sent: Tue, November 17,...
that is a good idea also,, take off silencer and try ________________________________ From: Randy Harrell <panhead_58@...> To: YamahaIT@yahoogroups.com ...
this sounds stupid but check your silencer to see if it stopped up or your pipe i have put a bike back together after letting it set for a while and the...
Wow.... Well, the bike just about idles. any throttle at all it will "wah wah" hahaha. I have to rev it like hell to keep it running. Even when I wind the...
All good things to check. A quick check is to turn on the choke and see if it makes it better or worse. If the air filter isn't oiled it will run lean. It's...
Has the pipe been changed from the original. Some people put on pipes and dont rejet. Check the carb for cleanliness, the float level , and the pet cock for...
There is no one easy answer here, and the short cut to a soulution is to find a qualified tech to check it out. I would Ohm the stator coils and perform a leak...
Well, put in a new plug, set at .020... Bike started fine, but doesn't rev out. It rides as if it's "off a cylinder" does that make sense? hard to explain...
.020 works very well, and helps on start up. ... From: "idit465" <idit465@...> To: YamahaIT@yahoogroups.com Sent: Monday, November 16, 2009 7:35:51 PM...
That's it. It can contribute to pinging in some situations but generally seems to work pretty good. You could try a BP8ES. (Larger NGK numbers are colder)...
I see them new on ebay sometimes. About 80 bucks. You can also run a yz boot and use a schrader valve (tire stem with the guts pulled out) for a spout. ... ...
Good luck. I've had my eye out for one for several years. They were discontinued long ago. You might want to search the old posts to know what not to buy....
I need an intake manifold for a 1982 IT175J. The part number from Yamaha is 5X8-13565-00-00. This is the rubber piece between the card and the reed cage and...
How much $$$? ... From: tim <timpearce3@...> Subject: [YamahaIT] Anyone interested in a 490 To: YamahaIT@yahoogroups.com Date: Tuesday, November 10,...
I see them pop up on ebay from time to time. I have also had luck finding them available for download on the internet. I have one and treasure it! ... From:...
Ok, the 465, here's the story....When I bought it, it was running rough. Had no power, or power band whatsoever. Sluggish through all the revs. Top end was...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
