OK, with all the talk of jetting I have a few questions to too ask I have suffered from fouled plugs and poor performance all summer. My pipe is really bad so...
start with getting the carb dipped. just remove the carb and bring it to a decent shop (call ahead). what they will do is, disassemble the carb and dunk it...
DG pipe and silencer go two up on the main, the pilot jet will probably be different also,, can't say which way,,, experementation!!! Sudco has parts,,,,...
is it normal for my 82 it250 to drip gas when moving it around? i get this alot when tank valve is open and i move it around or after when riding it seems it...
Your float valve is leaking, the float level is wrong or the floats are damaged. US model ITs were blue, white or blue and white depending on the year. The...
someone might have changed the tank,,, youll have to check the engine number ,, And even then these days people advertise parts on ebay that are YZ/IT .. the ...
yes they are blue. I have a '82 IT 250. its blue and yellow for the number plates. I just replaced the piston for it and it runs great,except that I REALLY...
... wrote: Its alright, it has a very weak spark making the bike hard to start. So, i am going to buy new coils, condensor, exhaust system and some missing...
I have to chime in, if it has a weak spark- 1) Try gapping the plug at .018~.020, this can make a big difference in how much voltage is required to arc the...
I can't imagine Yamaha not having those parts. That throttle was new then and used for many years afterwards. Joel _____ From: YamahaIT@yahoogroups.com...
Given that you need a cable anyway, why not just use a Gunnar Gasser, or Motion Pro Turbo Throttle. Repacement parts are available for those. ... From: "Joel...
Does anyone know of a flywheel weight that will fit an IT175J ? I called Steahly, and the short answer was they did not have a listing for one. I am willing to...
TRY A 125 FLYWHEEL ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around ...
Why would you want one? I have an IT175J and can't imagine how it would help anything. _____ From: YamahaIT@yahoogroups.com [mailto:YamahaIT@yahoogroups.com]...
oh ,, I missread that,,It seems that the heavy flywheel theory and more torque thing has been disproved, A heavy spinning mass ,ie flywheel and solid crank...
It's only better if it doesn't already have enough flywheel. If it already has enough then more will just slow it down. _____ From: YamahaIT@yahoogroups.com...
Anybody know how the inner clutch crankcase differs on a 250 compared with a 490? The clutch crankcase cover has the same part number on the 250 and 490 so...
anyone know where i can get a 490 complete bike, i don't care what the shape is like if the price is good. i have desided to go for a run at Bonneville and i...
The 250 will have a smaller area for the crank. I know on old Huskys you could machine out the extra for the bigger crank but I doubt you can on the Yamaha....
i have a 1982, it250J. just the other day i walked out to the garage and found black oil underneath one of my forks. 1. is it still possible to get a seal kit...
I have the same bike - and you will like it when you romp on it :) My stock bike runs dead even with my friend's newer water cooled YZ250 moto-crosser. At a...
1> Seals should still be available from Yamaha but aftermarket ones are made too. Both are cheap, around $25-$30 for a pair. 2> Taking the forks apart is...
I made up a tool to fit down in the fork tube and hold with a ratchet while loosening up the hex key in the bottom of the fork. Before I made the tool I would...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
