I just found your message while cleaning my inbox and didn't see a response. The letters tell you the year not the bore size. E '78, F '79, G '80 Joel ... ...
I just found your email. Sorry about that. It might be a direct swap on the front end but I haven't done that one. I don't see how it could be too terribly...
My clutch plates are pretty toasted. Very worn. Nearly beyond the serviceable limit. I found plates from Barnett with a part number of YPK-25K. I found a...
I've been a Yamaha parts guy for many years in the past and the Barnetts are never as good as Yamaha plates. If you are really tight on money just buy the...
Hey, Got another stupid question to make sure I'm on the right track??? My 490 was in storage for a long time. I drained the tank removed the stock strainer...
Hi Jim, sounds like the float value is obstructed to me. Also, make sure that the float is not obstructed and that it moves very freely. when you get the...
Hiya all, i'm in the process of splitting my case to find out where my 4th gear is, and i'm havin some problems. I have all the external gears and circlips...
Hiya all, i'm in the process of splitting my case to find out where my 4th gear is, and i'm havin some problems. I have all the external gears and circlips...
I have decided to sell my 1983 IT175K. The bike needs nothing, is missing nothing and comes with a ton of extra parts. It runs great and is very dependable. It...
My `82 IT465 surges at idle and during any non-load rpm. Not sure about full rpm. I have fully disassembled the carb, and cleaned it in a commercial bath....
It's sure to have an air leak somewhere unless the jetting is too lean. Have you pressure checked it? Does the mixture screw work? How many turns out?...
The jet is a #340, which is stamped on the end. The reference I looked at says that is the standard. I live at about 1500ft and I ride between sealevel to...
What about the pilot jet, needle, needle jet and slide? The main jet is for tuning at full throttle. What throttle opening causes surging? Does the gas flow...
I am still looking for several it parts to finish some bikes.I need an nos rear fender"white" for 80' it175,a set of fork boots for 83' it 175,a nice set of...
I have a frame and front and rear suspension incl- shock and both wheels/tires for 85 it 200 CHEEP.I also have a spare gas tank for 86' it200,spare gas tank...
Joel, I sure did. I am an old geezer. well, nearly. I am from the carb generation and have done all my auto work for 40 years. Small engines, car engines, ...
So, how much you want for the odometer? I will it fit the IT465? _____ From: itfreak2004 [mailto:itfreak2004@...] Sent: Monday, October 04, 2004 7:16 PM...
Hey there .......... How much do you want for the factory silencer for the IT200? '86 should be the same as for an '85, yes? Also, would you have a working...
You just discovered your problem. The pilot circuit is clogged. The pilot jet and mixture screw work from idle to about ¼ throttle. The mixture screw ...
Is there a fuel filter inside the fuel petcock valve under the tank? I put a new filter in line when I had it all apart. Fuel runs through the filter, but has...
I found an old YZ490 in a local motorcycle boneyard. It has the 18" rear wheel, large 43mm front forks, and someone has converted it to disk brake in the...
Ken,I don't know for sure that it will work but if so you can have it for 10 bucks and shipping. Ken Fletcher <fletchek@...> wrote:So, how much you want...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
