Watch out for credit cards, also. About 2 months ago I charged a friggin' foreigner, (from Malaysia, I should have guessed something was wrong right there),...
Same thing has happened in Australia with overseas Credit cards ... From: Wayne Hagler To: VirtualIndian@yahoogroups.com Sent: Friday, October 01, 2004 10:16...
Listers I am restoring a 1930 402 and am at the point of building mounting straps, the small metal pieces, that attach the seat to the yoke. I have some...
Nowbjr@...
Oct 1, 2004 1:32 pm
76999
In a message dated 10/1/2004 7:51:14 AM Central Standard Time, ... THANK YOU for that advice. This is one of the most important things i've learned from the...
Packard56V8@...
Oct 1, 2004 1:43 pm
77000
Hi Newell I would heat the strap if you are making any sharp bends, since the stock is cr you will not reduce any metal strength by heating because it does not...
Terry Duffy
MICHIGANDER@...
Oct 1, 2004 1:46 pm
77001
Duff The sharpest bend will be 90 degrees. Thanks for the information. I will now have to get something that will get it hot enough. I don't think my ...
Nowbjr@...
Oct 1, 2004 2:40 pm
77002
Hi, a lurker here, In the last year I've been digging up parts and pieces to assemble a 101 to drive and in doing this I've ended up with extra parts. On the...
A MAPP gas and Turbo Torch will do. I doesn't cost that much and you need one around the house anyway. Plumbers use it now as the old 50/50 solder is no longer...
I am converting a three brush autolite dynamo off a 741b to a 12v two brush fiitted with a Bosch voltage regulator. This is a common conversion in Europe. I...
I would be pleased if you would do that for me. I haven't had any other reply to my question. Thank you. Carl-Erik ... Message: 2 Date: Thu, 30 Sep 2004...
A couple of years ago I planned to paint my 402 the early Indian blue. At a meet I met a man from California that had done a couple of first decade Indians...
Nowbjr@...
Oct 2, 2004 1:38 pm
77008
Finally scored a militarty seat for my 841 but it is powder coated black, what is the best way to get the powder coat off. I have heard burning.......will this...
Won't affect the pan. Will definitely affect the pad and leather. ;-) c _____ From: RFrack8610@... [mailto:RFrack8610@...] Sent: Saturday, October 02,...
Paint striper will do the job. Let the striper sit on it for at least 2o minutes. Sand blasting will get it off. And so will a drill with sand paper. ....Larry...
Looking to remove the powder because I am not sure how well flat olive drab lacquer would cover the shiny black high gloss powder coat. [Non-text portions of...
Hi John My Bosch regulator says : VA 14 V 25 A , and a number : 0190350049. Never had a problem with this regulator. Michael 344 ... From: john chatterton To:...
Carl-Erik, ... I've called my prez, he has to search in his archives what is the RAL number. I'll get back to you as soon as I'll get his reply... -- Fred...
The paint you are looking for is Dupont Centari. It is code 325, albert blue for a early 60's Porsche. The paint code is, something 28A. I believe the ...
Gonna give this another shot. I'm looking for a DLX 81 for my '31 Chief project. Anybody got one? I have a DLX 72 for sale or trade too. Thanks! "Nevada"...
OK...I know you must get tired of me showing my ignorace here. From what I can tell from a couple of illustrated parts diagrams, the holes in the nozzle point...
Toward the air cleaner... but don't think it matters. [Non-text portions of this message have been removed]...
O1dp00p@...
Oct 2, 2004 8:16 pm
77020
I had some Dark Blue mixed up years ago to paint a 1914 Indian We selected the darkest Blue base tinter available and mixed in a very small amount of white...
Use wet-or-dry fine sandpaper to remove the gloss, the n paint it with the lacquer, I think that will give the Power coating enough 'tooth' to properly bond...
Well I finally remembered where I left my 1923 Indian Big Chief and Goulding Sidecar. So I went over to where it is on Display I drained the oil out of the...
I forgot to say I got my 47 Chief out and gave it a wash and took it for a ride Getting it ready for a rally next weekend at Woodford Showgrounds Hey Eddie...
Carl-Erik, ... reply to my question. Thank you. he found this : RAL 5012 RAL 2003 + 20 % of mating base (?) he doesn't not remember which reference is the dark...
