Wedge Lock or Swage Lock are brand names. If you use an epoxy make sure all dust is out of the hole or it will pull out. In a message dated 1/31/2009 1:42:18...
Craig, Great that we have Duff, et al, as a resource on this list. Sounds like you have most issues sorted out with your 47'. I'm addressing a few things on...
Just did a trial fitting with my rear wheel in the frame. Got it laced and trued by i guy who has done this severeal times on different vintage bikes. The...
Thanks Tim , We have been working on Spark's 46 for as couple months now and have finely turned it around on the stand and have started working on the front...
Hello, I just wanted to let this group know I am now in production of magneto caps for the Edison Splitdorf RM model for both 2 and 4 cylinder engines. Here is...
Although I am off emails here, I wanted to share with you that Mike Tomas at Kiwi Indian came to me in the form of a photograph, sent by his wife. In his hands...
Have any of you used an infrared temp meter on the chief jugs running Ollie or hotter cams? I fired up my chout and the front jug runs about 100 degrees hotter...
I can vouch for the gorgeous Mag caps that Bruce puts out. Just what the Doctor ordered! They look just like a bright & shiney, new, NOS cap. Bruce also...
Dick! Squirting ether around a running motor is dangerous, and it won't display anything but enormous leaks anyway. Please pressuretest your assembly with...
It would be nice if you could go deeper, but most resident concrete floors are only 4" deep. Darren From: VirtualIndian@yahoogroups.com...
Darren Chafin
djchafin@...
Feb 2, 2009 1:10 am
111729
hi to all on my chief im running a 12 volt gene with electronic ignition l went down to the harley shop for a battery l told him about the 12v gene and...
does it fit in the battery box, or ?? ... From: v.pinneri To: VirtualIndian@yahoogroups.com Sent: Monday, February 02, 2009 1:14 PM Subject: [Virtual Indian]...
I am now using HD batteries. Slight modification to battery tray necessary. Getting them at an Interstate Battery store. Not sure of the number but a very...
Ed: I am probably using the same battery as you are. It is barely too long for the battery tray, shorter than the Indian battery and not as wide. I cut a piece...
doug has his 50 chief forsale if that guy wants a good chief buy that one thats a good running correct? if i didnt have one that would be it just dont tell...
Do you have the correct year brake drum? I had the same problem until I realized I was using a different year brake drum that had a deeper bolt boss for the...
The rim is 16" and i am pretty sure it is correct. The hub is also correct for 46-53. I think he has the offset a bit to short. Should be about 0,6-0,8 mm...
I installed an 12V Odyssey PC625 in Jan 2006 and it is still running fine. I do keep it on a Battery Tender. Very high quality. absorbed glass mat (AGM)...
Thanks to everyone who chimed in on this. I took the plungers apart and found one of the lower springs was upside down. This did not allow it to seat fully...
Hi listers, Need bush/bearing 42752 Not been able to scource one, so if anyone knows oilite equivatent part number, or dimensions from an original maybe get...
Greg,I didnt realise these were unavailable,but I would probably pull one from donor case or make one. If you have your cam and cases,you have the dimensions. ...
Hi guys, My 47 Chief will not track straight down the road. That is to say that the bike wants to veer off to the right rather hard while riding. To compensate...
Are your tires inline? Darren From: VirtualIndian@yahoogroups.com [mailto:VirtualIndian@yahoogroups.com] On Behalf Of Tom McBride Sent: Monday, February 02,...
Darren Chafin
djchafin@...
Feb 3, 2009 12:17 am
111743
List, I am announcing that ironwigwam is now selling new Edison rotors made from an NOS original to exacting standards for his salt racing Indian tribe and for...
Hello all What decals were used for 1933 Indian Fours, was it the 3 by 9 Indian script ? Any recommendations for what type of paint to use for the gold pin...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
