If you google "yj125s" you will find several sources. The manual is 294 pages, 9.1 MB. It is too large to go into our forum's files all at once. I don't have...
I was able to upload the whole service manual to our files. It is normally in 2 parts; the first part is intact, but the second part is 9+ gigabytes, too large...
Hi Norm, This was a huge accomplishment. I tested it and everything worked fine. I am sure the group will benefit greatly. My only question is, how did you do...
Hi Chris, No big secret. There are a number of free utilities online for Windows machines. I used "JR Split file". http://www.spadixbd.com/freetools/jsplit.htm...
Thanks for sharing. This will be very useful. Chris ... From: Norm Birndorf To: Vino125@yahoogroups.com Sent: Wednesday, July 08, 2009 9:17 AM Subject: Re:...
There has been really lots of discussion about the upper muffler bolt. We have discussed it almost to death in past posts and many have proposed solutions both...
Thanks Norm: for those of us who have not had a problem, your drawing helped us understand what the rest of the group is talking about. ... [Non-text portions...
OK, so I didn't get the remedy in place in time, and mine snapped. Pipe is completely cracked through and separated, muffler hanging by the rubber tube. How...
Norm, Thanks for the info. I am willing to pay a reasonable price for quality work, but I am always afraid of being fleeced, you know the old "female in the...
Heather, I strongly advise against going to any dealership for repairs. It's not just females who get ripped off by dealers, everybody does. Their labor rates...
Jerry great tips. I am not sure a lot of us want to drill out the welded nut. If we just replaced the bolt and used the existing nut, maybe once a year, do...
I strongly recommend replacing the top and bottom bolts per Arizonavino's procedure and a periodic re-torque on the replacement bolts per spec's recommended....
Plus one on what Jerry said. Also, I've said it before and I'll say it again. The 22 year old mechanic working at a dealership will NOT respect a scooter...
I am keeping my business here in town(Urban Village Scooters), and NOT taking it to a Yamaha dealer. The shop I am taking it to is exclusively scooters, and...
Regardless of who works on the scooter it's important they have the knowledge. experience, and attitude to ensure the job is done right. There's no guarantee...
I would just add that there are very detailed instructions in the files section of this forum under Arizonavino's files. Chris Baum ... From: Curtis Cheney To:...
On mine, the upper bolt is a bear to get back in. Apparently, mine is misaligned to the point where it will not start the threads easily. I have done it at...
I replaced the OEM bolt with the NAPA bolt and continue to operate with no need for valve adjustment. On the same subject...I am still operating on the OEM...
From the Arizonavino file Broken original bolt & 8.8 grade replacement bolt and washer Long bolt dimensions are 8mm X 1.25mm X 110mm I've not replaced the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
Offline 
Send Email
