I noticed my Yamaha rotors would bolt right up, but... they have an off- set that makes them unusable. Looks like the stock Terraplane rotor is just a round...
Mine looks like a Harley Davidson 10" rotor with new holes drilled to match the hub. I am not sure that is the stock one from the factory. Mine is so hard...
Hi, could anyone tell me where I can get a replacement Terraplane windshield, and also instructions to mount side car to GoldwWing please? Thanks, Paul...
You can try bike screen.com I have no instructions but I do have mounting hardware for the GL1000 and GL1100 as well as about 200 other mount sets. Jay ... ...
A word of caution ... Those "clips" are hard to come by, unless you plan to drill the new screen ~ try not to loose the existing clips. FWIW Jim ... GL1000 and...
... If you look under "files" you will find the instructions. I suggest printing them. What are you going to mount it to? I have mine on a 80 GL 1100....
We all know that only three or four Terraplanes were produced by Craig. These, of course, used the three point mounting system we are familiar with. However at...
Bob I was a Vetter dealer back in the 80's and I can tell you Honda never was involved in Terraplane production All moun ting was of the tree point type...
... Honda never was involved in Terraplane production All moun ting was of the tree point type Mike Theim Greetings Mike, I never believed that Honda had...
I kind of doubt it myself as well. I have seen many sidecars bearing emblems that match the bike they are attached to. Kevin ... -- A bend in the road is not...
Have no fear Ron, I have not gone away just find myself otherwise occupied with the upcoming holiday family gathering. I will send some photos to the photo...
A lot of people (including me) have set up the Vetter with 4 point attachments. In my case I kept the lean adjuster in place and even with the 4th point I got...
So, did you go to Photos (on left side menu on website) and then click on the 'Add Photos' button? Or were you trying to send them via mail as an attachment?...
Greetings Ron, I did open an album in the photos section under greenman_2 but could not get photos to upload to it. I have sent photos to other groups without...
... 80 ... Hi Dallas, I'm going to mount it to a 1983 1100 Aspencade, Everyone seems to like the 1100 wings for hacks, power curve suits, lots of power...I...
We have the mounts in stock for the GL1100 $150 Jay Giese Dauntless Motors Corporation www.dauntlessmotors.com 866-638-1793 ... Dauntless Motors Corporation ...
Group: Well it is still snowing here in Spokane, but that give me time for some more work on the rig! I have had it out a few times only ('82 GL1100 and...
We have built this sort of thing, One issue is finding an acutator that is slow enough such that it does you some good. Some are so fast with the light loading...
Sounds more like an Inertia & Momentum problem (once the buckle actually starts turning). some sort of mag-brake might be needed to stop the motion....
The main problem for us is we try and use the acutators we stock for other aplications. They are to fast to fine tune as they are pretty much running with out...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
