First the slave didn't need replacing, i was changing the front sprocket when all this happened. I got home tonight around 5, removed everything and got the...
... Misalignment of the slave cylinder when replacing would be easy to miss...I've had mine off a couple of times and it would be easy to tighten it down not...
No, it is straight, it just "overpushed" the pressure plate out enough that it wouldn't close without me giving it a couple of degrees of rotation by hand. All...
... A good pre-emptive cleaning once in a while should reduce the likelihood of this problem. It's a simple enough process to pull the slave cylinder, ...
BTW, thanks for taking the time to share your experience with the group. I have picked up a lot of useful information in advance of doing a particular job on...
... Yes, even *I* can do it! Of course it would have been a little easier had I read through the entire process in the manual, the bit about pulling the rear...
Thanks to all for the help in locating a new front tire. It's on its way from RonAyres, and I'll have it on in time for some great springtime riding. Wishing...
Hubert, If I had an '02 or '03 with the original slave cylinder - I would put this part on immediately: Part Number: 23166-02F20 Description: COVER Price:...
Great European Travel Info - The Real FAQs- http://www.jack-travel.com ... From: "spochynok" <spochynok@...> To: <VStrom2@yahoogroups.com> Sent: Tuesday,...
On our 2 bikes, one at about 4500 miles the other around 6k I checked both, out of 16 valves I havd to adjust 11 of them, a few to move up to the higher end of...
Hey Leon, Welcome to the list, we have some mutual acquaintances, Mr Nye and Mr Pelland. Enjoy the Strom! John On Fri, 25 Feb 2005 04:59:56 -0800 (PST), Leon...
When are you going to be in the keys? Assuming I haven't already missed you? The wife and I leave next Friday, go to the races and then camp in the keys for a...
hewbert if you think tax,es over there are bad try living here in ireland, when you go in to buy a car for instance the goverment add,s on thier cut (tax)then...
some pics from sparky no particular order http://fulwell.com/modules/xoopsgallery/view_album.php?set_albumName=Numb_Bum_2005&page=1 willy looking fast on the...
Any advice on what a good, photo editing program would be to buy for windows XP that will allow light touch ups and frames? Thanks in advance, Steve ...
Be thankful your not obliged to pay for health care on top of that terrible tax. Although I've heard the National Health leaves somethings to be desired in...
I've looked everywhere and it seems no one makes a good aftermarket steel or steel/aluminum 47T rear sprocket for the DL650...........I don't want to go with...
Ireland doesn't exactly have free health care, my buddy works for Dell and when he got in his motorbike wreck I asked him about it, his company pays a lot of...
I don't know.....Isn't the DL1000 rear sprocket a 41T? Roy Bertalotto Dartmouth, Ma. ... From: John Barry To: VStrom2@yahoogroups.com Sent: Tuesday, March 01,...
Yes, but the carriers are the same bolt pattern for a lot of different Suzuki's. I ordered a rear 43 for a GSXR1000 and a front 17 from an SV1000 and a 530...
Thanks! Snow sucks! Roy Bertalotto Dartmouth, Ma. ... From: John Barry To: VStrom2@yahoogroups.com Sent: Tuesday, March 01, 2005 2:59 PM Subject: Re: [VStrom2]...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
