Hi Noel, The best bet as far as prices are concerned is to look up the part number on one of those sites, then go to http://www.servicehonda.com/parts.php The...
Hey ! That's better and better ! ;o)) For one VF500F front caliper piston : Price in France : EUR 30.55 (about USD 34) Auuuuughhh ! Regular US price : USD...
Hi Noel, Just noticed it is August 1st 2006 over there in France! ... Tom Mutant VF1000R "Far better it is to dare mighty things, to win glorious triumphs,...
Yes, Thomas, I'd also noticed that when all the memory loggers in the PC began to ring. At first I didn't know what was happening, then I saw the date and hour...
At partsnmore you can get caliper pistons for USD 20 (vf1000). Not sure they have some for the 500 and unfortunately, the honda part number is not the same. ...
Hey guys, Im kinda out of luck looking for a carb rebuild kit for my 86.. any suggestions? I pretty much need new rubber everywhere including my accelerator...
That's better yet ! ;o)) BTW, VF1000 caliper pistons won't fit on the VF500 (they are bigger, probably the same diameter as on my CBX750), but I found that...
You may have to simply buy your parts piece by piece from the dealer, if you cannot find an aftermarket kit. The parts are still available, I think, but it...
I overhauled my '84 carbs last year, and they were in fairly good condition (year 1984, 72,000 km). I had to buy no new part, the whole thing just needed a...
Not to discourage, but I hope you're prepared to nearly will away your firstborn child and your left leg for those diaphragms. Last bike we had that needed...
There is a guy on eBay who sells decent kits at a good price. His username is fngster. If he doesn't have a kit listed for the 500's just e-mail him. I...
Another option might be to find a good set of carbs from an 84. Larger bores than the 86 and will save you a lot of work and possibly some $ Tony Jamie...
ANTHONY COLANTONIO
acolantonio6062@...
Jul 6, 2006 9:42 pm
6146
This would need some adaptation for the tank-to-carbs fuel line diameter, FWIK. Nothing to be upset about though. Noël ... From: ANTHONY COLANTONIO To:...
Hi guys, just need a little advice please. Like many VF500F owners, I need some exhaust parts, and those that are available are really expensive (Predator...
So Im wondering.. do you think I could put an 84 carb into an 86 engine? I think the 84 is a bit bigger bore but If I move the whole thing with jets and all do...
So Ive seen some 500 ceptors with the f2 on the end of the name.. what the heck is that? They seem to have a full fairing but are there any other differences?...
About 2 years ago I had posted 2 pics of the french VF5F2 leaflet. See : http://minilien.fr/a0jvg9 and following. It's a 1984 model. The fairing lowers were...
Yup. I've got an 84 that a valve head dropped on. Got an 86 engine as a replacement. Using the 84' carbs though. I forget which set of the rubber mounts you...
From what I can see on the factory parts catalog, the rubber monts are the same from '84 to '86. So the '84 carbs should fit right in as well. Do notice that...
first off, Thanks for all the help guys. This is my main concern though. Levi, You said that you put an 86 engine in an 84 setup. The thing is, you probably...
I just bought this about a month ago in pieces with the owner stating that they thought it needed rings. I decided to put it together to make sure it did...
Yeah, my 84 was without a fuel pump for a long time. It seemed to only really be a difference when you were on or near reserve. Just make sure you don't have...
The main difference is that 84-85 carbs are supposed to be fed by the fuel pump, i.e. with an absolute positive pressure around 1.2 bar (17 psi), and this...
Yeah, there was no problems with with "completely 84'" setup without the fuel pump unless the filter or intake screen started to get clogged or you were...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
