Is there a way to actuate the radiator fans in a 2007 GTI 2.0T FSI. Autoscan data: Address 01: Engine Labels: 06F-907-115- AXX.lbl Part No SW: 1K0 907 115 H...
http://ross-tech.com/vag-com/faq_1.html#1.12 Sebastian Stange Technical Support & Applications Ross-Tech, LLC 881 Sumneytown Pike Lansdale PA 19446, USA Tel...
Is there a way to eliminate, or raise the speed limit on a 2009 S5. I know that tuning software will raise it, but all the customer wants is to have the...
RE: 2001 Jetta 2.0 ALH Car has a new TB and keeps setting Code P1542. I suspect TB was put on and Adaptation wasn't performed. Is their a way to retrieve the...
Hi, Thanks for the info and your quick reply, just found that this car does not have a DPF, bit silly sorry for that, didn t have the car on a hoist, just saw...
I think you are looking at Measured block # 029 (Temperature and Oil Level Sensor (TOG). Those are the only Wear & Soot Index values I see for that engine. Let...
Hi, I am doing some research on different DPF systems. Currently I am working on an Audi A4 S-line chassisnumber WAUZZZ4F68N054219
In the live data I...
Hi I had a similar problem with my W8. The problem was a loose connection witin the plug that connects onto the injector. The spade style connector within the...
I have done the compression check and it showed 18 bar on all cylinders.(but they did not cut off the gas during testing ) A new code popped up: 17414 - Torque...
Here is log from the SRI. Indeed MY is 2008. Tuesday,10,November,2009,15:12:06:01716 VCDS Version: Release 908.1 Data version: 20091018 VCDS Release 908.1:...
There is a complete Self Study Program paper on Audi's new Service (438). Mileage looks a little strange, maybe no. 2 oilservice? If Mileage based service...
First, this is obviously not a 2007 A4. A 2007 A4 would still be an 8E chassis, while the VIN clearly shows this to be a 2008 8K. Please go to the SRI...
Hi group, I am having troubles resetting the service indicator off an Audi A4 2007. Using the SRI function channels are read. Then I select the Flexible...
I performed an autoscan, here is the PCM data below. Is this what you need? I'm mainly interested in being able to manually activate the radiator fan. Do...
My VCD with software version 908 cannot communicate with my Vw Jetta IV. 1999 year model and made from US. Anytime i hook up my VCD to the car, i am able to go...
Hi Bruce thanks for clearing that up Adrian ... From: brucechancock@... To: VAG-COM@yahoogroups.com Sent: Monday, November 09, 2009 11:05 PM Subject: Re:...
Make, Model, Year, and Engine of vehicles in question? There are some models which require "Bypass CAN Init" or, more commonly "Bypass OBD-II Fastinit" to be...
Hi, Have tried using the interface (full HEX-USB+CAN Interface) as a generic obd2 interface a couple of times recently on cars in the workshop. The vehicles...
Hi, Does not matter whether car is LHD or RHD, left is left and right is right as seen from the seated driving position. (Offside and nearside however do...
Hi Gary Thanks for reply, that may help a little bit, UK car so side might be different but front and rear will be the same. Adrian ... From: "Gary Blaney"...
Hello Adrian: On the B5 Passat, V6, 4 motion, bank 1 is the right side, bank 2 is the left side, (drivers side US). Sensor 1 is before the cat, sensor 2 is ...
Gary Blaney
g.blaney@...
Nov 9, 2009 7:39 pm
29988
Hi Anyone Know when dtc for lambda sensors come up it states bank 1 or bank 2, sensor 1 or 2. I would like to know what it means bank 1 left or right and...
Thank you, So I will go to measure the compression. If the coil or injector are being fired by the Engine module I assume it can't be verified by software .....
You need to find out a few more bits of information before condemning the #3 injector. Compression; is the coil being fired by the Engine Module; is the ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
