Is there a label file for a 1998 Saran AFN 1.9tdi. This car has a intermittent cutting out then starts when cooled down and is difficult to start when the...
There is currently no text in this page, you can search for this page title <http://wiki.ross-tech.com/index.php/Special:Search/Exhaust_Gas_Recirculatio n> in...
Uwe, I got a no text message as well;here is the linked page if that helps: http://wiki.ross-tech.com/index.php?title=Exhaust_Gas_Recirculation&action=edit ...
Paul Callanan
paulcallanan@...
Jul 1, 2009 4:35 pm
29488
I'm scratching my head. I just tried it with Firefox, IE8 and Chrome and I get the same page (with text) on each of them. Here's the text: Exhaust Gas...
The link came in partially in the first email; the "(EGR)_Valve_Adaptation" part ended up not linked, thanks probably to Yahoo groups trying to do fancy stuff...
It didn't for me -- I clicked the link in the message I received from the group, and it what was quoted. Difference? My group settings here are for plain...
The link has gone wrong in the email (Aol web browser) Try and copy and paste the link into your search box including the '(EGR)_Valve_Adaptation' bit at the...
I have a 2005 Passat wagon 1.8L (R4/5VT) turbo automatic trans 4-motion (B5??) and I'd like to lower the idle speed to see if that will reduce the vibration...
I have repaired or replaced many parts with the exact same symptoms. Â Replaced -Â MAF, Air Filter, Fuel Filter, Coils, Spark Plugs (IK-20), many broken or...
VAG-COM, I still haven’t found the cause to this problem so I purchased the factory repair DVD and looked up the error code 16806, ( Main Catalyst (B1)...
Are you using a decent cat or a cheap alternative? This fault can be caused through using a cheap cat. You want an OEM quality one or one that meets regulation...
Sorry, should have also added.. Log the O2 bank 1 sensor 1 and O2 bank 1 sensor 2 voltages for a minute or two @ 1500 rpm'ish. Put the data into a graph and...
Matt, Thanks for replying. I also read your second post about logging the O2 voltage. To answer your first post, yes this is an aftermarket cat. it was suppose...
The procedure you copied and pasted below seems to have you looking in measuring blocks that would be applicable to newer motors than your 1996 ABA....
Looking at the label file I would suggest you try MB 115 and 116. I think field 0 is the voltage of pre and post respectively although I don't have the info...
Matt, Thanks again for replying. When I was looking at the Advanced Measuring Blocks I found MB 115 and 131 havd voltage readings and both of them were...
Hello I've a golf mk5 which I'm trying to program a second new key, I've checked in immobiliser. measuring block 001 field 3 = yes I have the correct SKC code...
Try waiting 5 minutes after turning on the ignition with the un-matched key before doing the Security Access and Adaptation. If that doesn't work, cycle the...
hi all you must erase the old keys before you program new one do it as follow 1-go to immobilizer 2-login 3-adaptation chanal 01 put 0 then save this wiil...
i think you need use this... ( i say because i use this) instrumets login adaptation chanel 21 then only change 1 to 2 test save and open the ignition with...
I've attached a log of MB's 115, 116, & 030. and as Matt suggested the O2 voltages seem similar. So should I go ahead and change the cat to an exact...
I forgot about not attaching files..........., I added it to the files folder in a subfolder called "1996 Jetta with fault 16806" thanks ... From: Matthew...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
