Hello all, Im fixing a Mk3 VW golf with an AGG engine and autobox. The car was harsh shifting and i have scanned the engine and trans ecu and it has an active...
Can anyone confirm if the Throttle position sensor G69 directly connects to the TCU or if it gets its signal via the ECM? Ive had a suggetion that the wiring...
ECU p/n 037-906-025-R Coding 00001 (1 = Automatic transmission) ECM p/n 01M- 927-73-GH Coding 000 I did some tests on the throttle body today and it all was...
Hi all, Have a customer who has a Audi Q7 without Cruise Control (didn t know it existed) Anyone over here experience in retrofitting these? Is it a matter of...
Hi All, I was wondering if I can use my VCDS to get an idea of the wear on the clutch pack in my 2005 A3. Relevant bits of my last auto scan below :- ...
Hi, i also bought an S4 sedan 2004 and i would like to put an auto light (day light) feauture. What equipment do i need to buy except the light switch and...
Can you post Chassis No., Type No. & Trans. Code from the vehicle details sticker? ... as ... read ... sensor ... deg) ... TPS ... (red, ... it ... multiplugs ...
We have a 07 VW Transporter 9 seater, we have changed the air bag control module but cannot read codes from old unit as it was water damaged. Can anybody tell...
As the fault code describes, this unit does not fit your car. Installing used airbag components violates manufacturer specifications and is therefor illegal in...
I have a US '99.0 A4 2.8 Quattro with v5.3 braking. ~109k miles. I get an intermittent fault indication. Fault code #1203 - Intermittent Fault with a wire...
Hello, You will find all the information at this link. http://www.navplus.us/forums/showthread.php?t=5974 Check what is the index of you central electric...
I did some more testing on the golf today and the tcu wiring looked ok. I found another tcu from a 96 A3 that had a similar engine and transmission so i tried...
In our country it is common to replace faulty units with used parts as long as the part numbers match and the specifications are equivilent. There are no laws...
VW specifications say worldwide "replace with NEW unit", we stick to those specifications because we have seen enough BS with used units in the past. I don't...
Hi all, Have a customer who has a Audi Q7 without Cruise Control (didn t know it existed)Anyone over here experience in retrofitting these? Is it a matter of...
Hi All, i've a Skoda Octavia 1Z (golf V platform). When i look at ECU 0x09 Central Electronics (3C0-937-049-E) it has 2 submodule. Submodule 2 is for the...
The rain-closing feature will close any open windows and the sunroof (if applicable) when the car is OFF. Not sure if it has to be locked or not, but the key...
Hi,        I don't think all used airbag modules can always be recoded, only some can. There is a common misconception that just because 2 airbag ecus...
Hi im having problems with Polo 9N , i replaced the ABS control unit with another one, used one, and know when i go to BREMSELECTRONIC my coding is 0000. Which...
I don't recall the exact speed, but "Highway Light" will turn on the parking lights and head lights when you reach or exceed a pre-determined speed. I assume...
I can also confirm that, since yesterday, I have VCDS working fine on Win XP in a Sun Virtualbox install on a MacBook Pro running Mac OS X 10.5.4. Installed...
I have only had this issue since updating to VCDS. When I was using 7xx, i never had this issue. I can not stay connected long enough to get readings from...
I have a year 2000 Passat estate with faulty central locking. Everytime I use the central locking button on the driver's door panel to lock the doors from...
Been here? http://www.ross-tech.com/vag-com/images/Vista-USB-Power.png (This is linked from our FAQ entry 2.5) What Data Version 805 are you using? Look on...
You have problem with lock inside the door.Open the panel ,remove lock,open the motor ,and resold all contacts and check the microswitch outside motor...
You have problem with lock inside the door.Open the panel ,remove lock,open the motor ,and resold all contacts and check the microswitch outside motor...
I've tried this on my 1Z, but it dodn't work ! - opened car - opened door - opened all windows - closed door - locked doors - wait 1 minute - poored water...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
