Hey all, I need the details on how to limit the speed to 80 Km/h on a 2008 VW transporter with an AXE engine code(5 cylinder Tdi). I am aware that it can only...
... Go to adress 01 engine ecu, then login with12233.Once access granted, you may adapt channel 07 and set the max speed limit. This operation is irreversible,...
Hi All I have a 95 A4 1.8 turbo and i find it anoying when im locking or Unlocking the car because it has a delay of the vacuum pump when operated via the fob....
Can you talk to this car's 35-Central Locks at all? I'm not positive, but my fuzzy recollection is that locking system used in 1995 A4s was not diagnostic...
Thw T5 doesn't support transport mode, what makes you believe it does have one? Please refer to the factory repair manual for details on the pre-delivery...
Hi, 2000 Jetta GLS VR6 - air condition stopped working, trying to talk to the HVAC controller and I get no response. Able to talk to all other controllers...
Does this car have a fully automatic climate control? One where you can set a particular temperature in degrees? If not, there is no HVAC controller to...
I have now tried two different lambda sensors and the owner has already replaced one and the car still runs badly with exactly the same symptoms and is...
Not every problem can be diagnosed with a scan-tool. In this case, since there is no "computer" controlling the stuff that doesn't work, wiring diagrams, a...
... Check the ground wires to the engine. I don't know the details of the Audi, but a lot of VWs have several ground wires that connect to the head. A...
Hello, I'm having problem with coding Audi A4 (8E) make year 2006. ABS brakes. The code has been changed and now I don't know what it was. I hope that someone ...
Like Uwe said...........got to do it the old fashion way.... Test for power and ground to the A/C compressor clutch. I have seen those clutches go bad on a...
Thanks I have checked the earth connections on the side of the head i will have a good look to see if there are more. The sensor does operate correctly and the...
Are we allowed to post 1 picture of our ride? Below is a dump of all address found on my rabbit. I have changed: Coming Home (Lock)(does not work as intended...
I think you mean speedometer... You should (may?) have instruments, just change the distance impulse number to one that come close to what your running. X...
Well I tried to change the coding on the dash panel but all i saw was a 3 digit code instead of the five digit one, the code was'100' so i tried changing it to...
... Hey, Thanks ! I tried different ones: Impulse Numbers 0-4 are accepted, but what do they mean. I read siomewhere that the difference is just the type of...
1, 2, and 3 are documented here: http://de.openobd.org/vw/polo_9n.htm#17 The value is the number of impulses expected from the vehicle speed sensor per some...
What model year is this A4? The stuff documented here http://www.ross-tech.com/vag-com/cars/audiB6.html#17 definitely worked in the 2002 model we had way...
Hi, I just installed a Rear View Camery in Audi A6 4F the problem is the Control module can not be coded, control always reject new code 1020704 or 1020604. ...
The data you gave us makes no sense, especially the current coding. Please use... VCDS > Select > 6C - Back-Up Camera > Fault Codes - 02 > Copy/Save Codes ...
Hi guys, i just collecterd my S4 from the dealer as i was having endless misfiring for the past three weeks. Now the problem is the idling is not level. Is it...
Hi Sebastian, This is the information for control module Tuesday,08,July,2008,19:11:44:26388 VCDS Version: Release 805.0 Data version: 20080625 ... Address 6C:...
Mr.Stange (or anyone who can help)..I`ve experienced first problem with your product since 2006.. After dovnloading 805.0 version couple of weeks ago...
What happens if you perform... VCDS > Options > Test ...what message do you get exactly? Sebastian ... with your product since 2006.. After dovnloading 805.0...
Thank you very much for super quick respond..also sorry for delay we have a brutal storms in NC :-) I got: Port status: ok Interface found type Ross Tech...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
