Please see our list rules. http://www.ross-tech.com/vag-com/list-rules.html 2.) When posting questions related to a problem you are having with a particular...
Can anybody help me with this problem please: All 4 windows operate normally from the driver's door, but will not operate from the 3 passenger doors. The 2...
Hi David, It sounds to me like the multi connectors in the door hinges or the window switches of the removed doors have not been properly connected, or some...
Hi group . I have here a Passat with engine BDH 2.5 tdi 2005. I got the mil lamp flashing and this dtc: 012401 - Reservoir for Additive for Particle Filter:...
I have a 2000 A4 1.8T (ATW). Today on my way to work, I logged MSMT BLK 2, and 20, to look at MAF, load, rpm as well as per-cylinder ignition retard. I noticed...
Hello Arthur, Back in June I was getting my check engine light (CEL) lit. So when I hooked up the VAG-COM it turns out I was only getting about 100 g/s...
Dear Sir, Due a computer crash, i have lost my account name and pass word to Vag-Com site store, i have being a user off Vag-Com for many Year and have...
Jong, Yes, I agree that there's probably some margin unit-to-unit, engine- to-engine, and especially with air temps and intercooler soak temp. I'm not saying...
Hey Arthur, ... air? OK. Now I get the question. The only thing that comes to mind is that I tested my MAF sensor on May 31 (at 5:03 PM to 5:18 PM) and may...
... You can just make a new one, or even place orders without an account. Having an account in the store is not necessary; is just a convenience that allows to...
I would log boost (Group 115), and I would also check the fuel trims in Group 032. These don't change fast enough to make it worthwhile to log them, but they...
Hi to everybody, I have here en Golf 5,gasoline engine,I do not know engine type.The owner has bought all what was needed for CCS retrofit,original parts.He...
hi i just put a new unit into a 06 passat and had the problem with the steering angel sensor no basic settings. I couldn't find any problem but when i drove...
I have a 2001 turbo beetle. My oil pressure light started to blink and my oil level is good. I realize that it could be multipal things wrong. I want to check...
A general question on basic settings. I hear varying views on this subject. Is it essential to reset basic settings, e.g. after battery removal or replacing ...
... Do you mean that you want to remove the oil pressure switch and screw an oil pressure gauge there? Might be a sludge problem with your engine and you want...
The only way for sure to know the the oil pressure is good would be to connect a mechanical gauge to the oil pressure tap and check it. When electronic...
Check for a mechanical fault in the Steering Rack or power steering pump or motor. Shawn ... From: Daniel Hleva <d_hleva@...> To: VAG-COM@yahoogroups.com...
The reason you hear various views is because people have different cars with different motors. Many will run fine without doing anything, while others are...
Hi All I am a new member just trying to find my way around please forgive my ignorance i only just bought a vag com lead I am working on an Audi A6 which had a...
Hello to everyone. I am new to Vag-Com, but have some experience with other scanning software. I am working on an R32 Golf that shows the following fault...
Seems like a loose connection or broken wires tor the MAF sensor to me. Have you checked that? Ricardo ... From: winkworthsgarage To: VAG-COM@yahoogroups.com ...
7% is not enough to indicate a MAF in need of replacement, yet the 142 g/s maximum airflow is quite low. An R32 should be showing a maximum of around 200...
Hello Phillip, ... In some places on the net I am reading that intake air temp (IAT) sensor is part of the MAF sensor. http://www.autoshop101.com/forms/h32.pdf...
Hi Ricardo, ... My MAF sensor was diagnosed faulty by my Audi dealer. But after some research on the net I decided to try giving it a cleaning instead. After...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
