Please can u help i'm looking for measuring blocks for an audi a8 2000 with a engine code AQG 3.7 V8 5v fault code coming up is P1141 thanks [Non-text...
WIZZADAVIES@...
Feb 1, 2006 10:28 am
21695
No. You'll need to clear the code. Simply press "clear" and the DTC will be removed. Rightly or wrongly I often come out of the module/controller and go back ...
Could anyone help with this fault, the customer had the EPC light come on and lost his throttle, We replaced the throttle body and everything was fine for...
Toby@DGmotors
toby@...
Feb 1, 2006 12:12 pm
21697
Was the code set when the car came in? If yes, I think if the cars battery voltage dropped very low at start up you might set this code. Also check for any...
There doesn't seem to be any basic settings procedure for this. Both second hand units are faulty. It appears that the clutch packs fail and lock up Derek ... ...
I didnt see a clear button. ... From: "Bruce, Patrick" <p.bruce@...> To: <VAG-COM@yahoogroups.com> Sent: Wednesday, February 01, 2006 6:06 AM Subject:...
Cheers for the info, The throttle body code was reset (cant remember the code for when it first packed up) this is the one that reapears. The butterfly still...
Toby@DGmotors
toby@...
Feb 1, 2006 3:33 pm
21701
Neils, You were right. I found the measuring block library in the "files" section of this group and it states exactly what you mentioned. Thanks, Chris ... ...
When I fixed my brake light switch, should I have cleared the code in order to have the lights turn off? Should my brake lights stopped working when I replaced...
Hi,have you try with another good battery.I have an Seat Toledo 2001 with same engine code and 2 years ago I had same problem.So I have borrowd a good battery ...
Not sure what you mean by "have the lights turn off" But basically after replacing the switch it should have been a simple case of going back into the...
What’s up Rick? I’m not real sure, but if you go to HYPERLINK "http://www.ross-tech.com/"www.ross-tech.com and send an email with the information I’m...
Sebastian is right, of course, you can not do it with Vag-Com, however, this is not the whole story. on my 95 Passat, with a none diagnostic capable instrument...
On a 2002 3B 1.9 tdi pd Passat the brake pad light comes on intermittently. Pads all new wires all look good. Is there a way of finding out which wheel is...
Hi guys, Today somebody came to me with an Golf III 1995,engine code ADY, 1984 cmc/85 Kw,1H chassis.He told me that trying to see why his engine was not...
Sounds like someone ripped out his DLC. On a 1995 Golf it should be here, like this: http://www.ross-tech.com/vag-com/cars/applications/96mk3.GIF Gray/White =...
Thanks! I'll let them have a look at the injectors and possible leaks. What bugs me is that everything is 100% when driving.....just when I'm at idle with AC...
... Just had my evap solenoid done -was sticking open causing same symptoms good luck -valve cost $275 nzd [Non-text portions of this message have been...
Simon
sallan@...
Feb 3, 2006 9:26 am
21717
I have a similar problem with my B5 RS4. It only reports a misfire at idle otherwise the car is producing top HP and torque checked on a rolling road. I...
I suspect these miss at idle problems may be caused by carbon build up on the back of the valves. If it's easy to remove the manifold have a look at the necks...
Is there a way of finding out with vag com which wheel is setting off the pad warning? I know it's not the pads worn down as they are new but one may have a...
Sebastian, Can you expand on that as most cars I've owned have had wires in both sides of the front brakes. In addition the B5 S4/RS4 have wires on all 4 ...
My 2002 Jetta and my 2000 Golf both only have the sensor on the right front wheel. My 2002 BMW 540i and my 2000 BMW M Roadster have a sensor at both the left ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
