After replacing the battery on my 2nd key it is no longer works the remote central locking. I've tried to reprogram using the description on the ross tech...
Sebastian Thanks for your quick response, however I'm confused by what your response Does the module require a log in code to program the 2nd key? What do you...
... No. ... There are some rare cases where you can not enter e.g. 4 as new key count, you have to do it sep by step. So you enter 1 and adapt key 1, then...
Dear Sir : It is very nice to deal with your updates product …. I would like to know more about long coding ,,,,uses ,what for ,how,, Thanks for your...
Open with text editor (notepad is OK) the label file for the controller which you are exploring and you will see the values of all channels. ... Sincerely...
I have a 2000 Jetta, 2.0l gasoline engine, occasionaly a hard start with the following codes: VAG-COM Version: Release 504.1-D Control Module Part Number: 06A...
Never thought of it, will check today and will get back to you. Thank you for the quick response, RN ... __________________________________ Discover Yahoo! ...
Tried to scan Audi A4 1.9 TDI 2003 today to see why airbag light was on but I could not connect to any controller status on connection in options screen say...
1) Which VAG-COM version (version number)? 2) Which interface/vendor? 3) Are you able to connect to other control modules (e.g. engine)? Sebastian OpenOBD.org...
Latest version 504.1 hex+can usb ross-tech cannot connect to anything _____ From: VAG-COM@yahoogroups.com [mailto:VAG-COM@yahoogroups.com] On Behalf Of ...
Try to insulate cabel from ignition (immo antena)...Then reset DTC. Good Luck. BP ... From: "ihsan" <m.ihsan@...> To: <VAG-COM@yahoogroups.com> Sent:...
Bojan Petrovic, BP Ap...
bpapsolut@...
Jun 2, 2005 12:32 am
19474
... For those of us with the registered version: is there a more detailed instruction of this alternate method? I had the same issue programming a 1999.5 Jetta...
Thank you for the reply, I'm talking for any car that Vag-com work on, so i can print me the reference sheet that will help me diagnose, and also speed up the...
Did you use this procedure? http://www.ross-tech.com/vag-com/cars/vw-remote-matching.html The current VAG-COM Version suggests a procedure when you access...
There is no way to give you information about ALL cars, if you want to have sth. similiar you should buy the bentley manual or the official repair manuals. ...
I believe that is the procedure, as I said, it's been a little while. I should have access to the car again in the next couple days and I'll try it again and ...
This might be of help: http://home.att.net/~turbo20v/OBD_Codes.htm ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo!...
My 1994 Jetta auto will not start. Before this it stalled once in a while but ran fine most of the time. Now when I try to scan the car I get an error message...
... I'd start with the wires behind the connector in the car and at the ECU. Maybe the battery connection and wires at the starter, while you're at it....
I have been getting a code for throttle body lower limit not reached and for throttle body out of limits on my Passat. The car drives normally but the ...
JHH1441@...
Jun 2, 2005 6:53 pm
19484
Did anybody test VAG-COM with the new VW Polo (9N3) or the new VW Fox (5Z)? I would be interested in some auto-scans or control-module-finder scans. Sebastian...
Thanks Miguel That was just what i was looking for a quick reference, Thank you again Chris....., ... From: Miguel Ikeda To: VAG-COM@yahoogroups.com Sent:...
I scanned an Audi A6 2.4 liter V6. It doesn't have any aftermarket modifications. I found the following: VAG-COM Version: Release 504.1-UD Control Module Part...
