Hi all, On 94 Jetta 2.0L I getting camshaft position sensor code: 515 Camshaft Position Sensor (G40) No Signal Car runs but misfires. If hallsensor in...
I have no experience with VW gas engines, however, on the 2 Ford's and the Saturn I own, the camshaft position sensor was only used to start the car to ...
You guys really Rock my bettle now Rips Ive put a vr6 fuel pump relay I think I gained a few HP .... lol Seriously was the relay I put an old one from a...
Please send me a list of avialiable measuring groups. e.g. 001, 002, 003, 022, 023, 024, 025, 050... A list of the avialiable adaptation channels and your...
Hi When recoding VW and Audi Keys using vag-com, Must a blank key be used, or can an identical key for another car be reprogrammed without being blank/new... I...
... I wouldn't be so sure. I think with Immo 1 and 2, you can always adapt a used key. But with Immo-3, I think a key can end up "locked" to a particular...
VAG-COM Release 409.0 is now available from the Download Page: http://www.ross-tech.com/vag-com/download/ If you've been to that page recently, you may need to...
I do not have the answer to your question but I would like to relate my recent experience. In an attempt to replace a lost key on a 2003 Beetle (Immo 3) I ...
2004 Passat TDI. Month ago recoded door locks with Vag-Com. Now Vag- Com does not recognize this controller. Several things could have contributed. First,...
Wiring checked out fine, so distributor was replaced and no more backfiring. I figured I should do basic settings now. I tried to do basic setting procedure on...
Do a hard reset of that controller, pull the fuse for the centr. conv. module and wait approximately 10 minutes before replacing the fuse again. This may help....
I am not sure what its called, but is there a way to do "auto down" or "one click" up or down with the remote windows rather than having to hold the remote...
I never did a basic setting on a 94 No need too those obdI system were not a very do system for the mecanics sometime it tell you whats the problem but...
Removing the fuse for 10+ minutes did the trick. Now I can access the #46 Controller again. Thanks. Nice to have techs out there for assistance. Ron [Non-text...
ECU: 023 906 024 A 95 Eurovan Vag-com 303.1 Old ISO interface. I am looking at the oxygen sensor activity. This is tricky with such a slow controller, only...
Not that I have been able to find. My A8 is in the same situation. I think the auto down is only available to the hardwired switch. Greg ... From: Bryan D....
Your cluster is already coded for service reminder, with digit 4 its coded for flexible oil change it should be up to 720 days or up to 50000 km ... From:...
Hello!! i have AudiA4 with board computer (VDO). When i buy car there wasnt AUDI car radio. now i get Audi concert and cant find 3rd conection for radio ...
In models before 95 you were able to do a "one-click" on your window switch and it moved up automatically without a stop (closing windows). Where moving the...
Both my front windows have 'express' up and down. Push button all the way and let go, window opens all the way. Pull button all the way up and let go, window...
Hello all, I have a 94 Jetta GLS 101K miles with a 5-speed and 2.0 ABA motor. Today I failed California's smog test. The smog tech concluded that the engine...
Did You Disconnect/reconnect battery??? This error use to appear if you disconnect battery to do any maintenance (retrofit Control cruise etc) and reconnect...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
