Got it connected, just had to remove the "Echo after send" option.
However, I still can't reset the airbag light.
These are the log messages:

Read diagnostic faultcodes :
New Data, ServiceID : 07

Clear diagnostic faultcodes :
New Data, ServiceID : 05

Here it is a screenshot:

http://dreamslayer.altervista.org/captkwp71.JPG

What to do now?







--- In UniDiag@yahoogroups.com, WhizzMan <whizzman@...> wrote:
>
> have you tried setting the protocol to KWP81 (hard, not auto) and 4800 baud?
>
>
> On Tue, Jun 30, 2009 at 1:37 PM, G<painkiller982@...> wrote:
> >
> >
> > Hello
> > I'm trying to turn off the airbag light on my GTV 3.0.
> > Got kwp71diag and the KKL cable modified with pin 3 bridged to pin 7, but
> > can't connect. I set the ECU address to 0x00, but still it doesn't work.
> > This is the error message:
> >
> > KWP71Diag
> > test version
> > written by SanderQV
> >
> > DebugScreen
> > COM Port opened
> > Init started
> > Init Ready
> > No KeyBytes; Init not OK
> >
> > What am i doing wrong? Unidiag works fine thought.
> >
> >
>