I have a problem with aftermarket grips sliding outward and contacting the bar end weight on my Tiger. While the lack of lubrication and or fraying cable...
Bike failed MOT today for sticking rear brake. No problem. Followed Haynes Manual - remove pad retaining pins What they didn't say is the far end is peened...
Ken- I feel your pain. I currently have a rounded out hex on one pin retaining bolt as well. I believe I've seen a tool which is inserted into the hole, and...
The next question of course is does anyone have a serviceable rear caliper for sale in the UK ? I will try the usual suspects, Sprint Manufacturing, Jack...
In a message dated 7/1/2008 8:13:12 PM GMT Standard Time, ken@... writes: The next question of course is does anyone have a serviceable rear caliper...
... The allen heads on the pad retianing pins rounded partly due to the pins being seized in the alloy caliper but mostly because I hadn't realised the far end...
Sorry for the dumb question, I don't have the owner manual, and Haynes does not tell anything. What are the petcock positions on a 96 Trophy 1200 ? Obviously,...
The 5-litre reserve is part of the 25-litres. The amount of "reserve" can vary from bike to bike as it depends on the length of the "reserve" tube up into the...
I just replaced mine on my 1999 thru kneedraggers.com with galfor steel brake lines. I can tell you that the steel lines made a great improvement in the feel...
Ian, First, is there something wrong with your brake lines? I ask 'cause the factory lines are allready braided stainless lines under the black plastic cover....
I ran out of gas once, put it on reserve and made 10 miles before running out again. don't count on that 5 liter reserve and don't depend to much on the ...
Hi Bob: I'm on the left side of the pond, so to speak, just outside Chicago. Turns out, it is a '96. I need the front fairing, and the left hand fairing....
Hi all I passed my Daytona over to a new owner yesterday, so once again I am Triumphless. Next to go will be my BMW R1100GS to make way for something newer,...
... to remove ... innards ... I've had this a few times on my old Trophy. Managed each time to remove them with a stud extractor set. I would hold the...
... You've been gone and come back before! You'll be back again. I no longer have my Trophy either (I've got a Sprint RS now) but I still check in here...
Erv asked: is there something wrong with your brake lines? Other than that the PVC covering is pealing, nope they work very well. The Triumph specified change...
Hi Mark, I'm quite sure the US members will be able to help you with the parts. If not, you could go online and email some of the companies in the UK (check...
Just where are you Ian? Poppa Jack ... From: irbdfx <Ian_Bardsley@...> To: TriumphTrophy@yahoogroups.com Sent: Tuesday, July 1, 2008 3:50:43 PM Subject:...
... Prime has to be pushed in and ... crack the ... I tried pushing the knob in, on my 96 trophy, and it does not seem to work. Can it be that they introduced...
... wrote: I tried pushing the knob in, on my 96 trophy, and it does not seem to work. Can it be that they introduced the "push in" type of tap later ? No, my...
Following my successful attempts to destroy a sizeable chunk of alloy whilst trying to fix my sticking rear caliper, I ended up ordering a refurbished rear...
Cheers to all, I'm sure i'll be back sometime. Stef ___________________________________________________________ Try the all-new Yahoo! Mail. "The New Version...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
