Is the float hanging up on something? Try tapping the side of the carb with a rubber mallet (gently) and see if it stops leaking. This would indicated that...
Hi, You might check the neddle that control the fuel flow inside the carb, you might need to replace it when you had already set the float in correct position...
... If the float or needle is not the EXACT SAME or CORRECT OEM part - the needle might be a bit short or long, and the float fingers not in position to seal...
I do believe all small honda's of that era have a small spring loaded pin inside the needle so the correct setting of the float is to hold the carb sideways...
--It's possible you have a cracked overflow/vent tube in the carb. Take the bottem chamber off and try blowing into the brass tube, you may have to add a pc of...
ou may also want to closely examine the float valve- I've had new ones out of the pack that had some flashing on the tip of the float pin that caused the carbs...
I have not heard from them in while either. I jumped through the first set of hoops then they sent all my paperwork back along with the money and had different...
... Have you contacted your State's Attorney? You should and it should cost you nothing. They may be legitimate; who kows? But asking for more money before ...
Thanks to all who replied. I sure a lot asking questions around this place, and I appreciate all the thoughtful answers. I've tried to consider (and remember)...
Let's face it.Some of the newer parts made for old bikes are esentially "generic".They are made to fit a variety of specifications on motorcycles that are...
With petrol prices going berserk, i have decided to purchase a Honda CG125 [W-Reg] with only 14,000 on the clock, fully serviced, new clutch. I actually have...
haha, a pound a litre!!... thats the least of ya worries, my mate said he heard that in somethink like 2010... that the goverment intend to get rid of...
The information you are referring to is on http://www.mag- uk.org/index2.html. I agree with what you say. A few years ago it was "get on yer bike", now they...
The information you are referring to is on http://www.mag- uk.org/index2.html. I agree with what you say. A few years ago it was "get on yer bike", now they...
Well the article i read isnt about banning motorcycles, but squezing the balls out of motorcycling with a vice like grip. I personally treat all car drivers...
spot the big girl's blouses at http://www.traffic-answers.com/forum/index.php?topic=1916.0 ... CG125 [W-Reg] with only 14,000 on the clock, fully serviced, new...
You sound a little bit like OGRI...heh heh! But i get your drift loud and clear! Computer Problems of Barnsley www.technicallyspeaking.co.uk Telephone: 0870...
CR 250 I JUST GOT. IS THERE ANYWAY TO LOWER THE FORKS- SUSPENSION , THE DANG THING IS TOO TALL. IM 59 N 5,9" TALL. IM OLD SCHOOL N WANT MY BOOTS TO TOUCH THE...
Amen to that, Fish. I have gone places so far and so high up in the mountains that I NEVER would have went, had it not been for my Honda. I like having both...
I just purchased a 1983 Honda Express and the wiring has been disconnected. I was just wondering if anyone might have one that I could use. Thank you very...
Hi All, I'm cleaning out my shed, and I've got a skeleton of a 74 CB500--It's just a rolling frame really. There's not much left, but there is a really nice...
... === Hey Stevo, Too bad we can't trade forks and shocks/springs (maybe we CAN ?<g>). I have a '77XL125 that's about 2 or 3 inches shorter than I'd like. ...
Greetings groups, I'm going to be very busy this coming week and won't be able to do much 'timely' moderation of these four lists. I apologize in advance if...
Hey all. My name is Ken and live in Canada. My father just salvaged I beleive is a C50 early 1960's. Missing all lights, half the electrical system, and spash...
Has anyone had luck finding new or repop exhaust for CT200?? Mine has rotten a hole thorugh the bottom, and blew a chunk of the pipe off while riding it, I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
