Thanks ! It worked. she told me it's much easier to get muscle around the lever when i adjusted the freeplay at the handlebar. Clutch still disengages allthe...
I recently picked up an '82 xr80. It starts on the first kick when cold with the choke on and within 15 seconds or so I take the choke off and it runs...
Hey, My first guess would be that you have some sort of cylinder head or intake manifold leak when the bike warms up. It's very possible that once it's warmed...
Hello all. I am contemplating some changes to my CB100N. I have a spare engine. The question is which of these two options would have the greatest effect. ...
Hey Mike, I got my new flywheel puller, and I'm ready to give it another go. I threaded the fat part in, after taking off the nut and washer holding the...
I got brave and removed (correctly!) the flywheel. Thanks to Mike for your advice from last month. Now that I have that removed, I'm onto the stator. Me and...
Hello Try tapping the head of the centre bolt, the one you have been tightening in, with a hammer whilst maintaining some torque on the bolt preferably with a ...
hi from new zealand i have removed them before by using a spark plug and just screwing it into the hole works a ok cheers david ... From: DavisBrandaps@......
I have Metro 1 (unrestricted), weight 235+ and have no problem hitting speeds of 30 uphill, 40 downhill and a steady 35 or more on flat ground. I have only...
Hello Jon, I am a stout 250 and have no problem doing 52 mph on flat ground with my 1982 CT110! It is truly a little screamer with great bottom end pulling...
Thanks for the advice, guys. David, I don't think I understand your method. The threads on my flywheel are backwards compared to my sparkplug; I don't think I...
hi sorry about that i was thinking about the honda xr range all you had to do was screw a plug in the hole and off came the flywheel cheers david ... From:...
Is there any pipes available for an 1986 Honda Elite 150 Deluxe. I would like to get a pipe and some other "Bolt" on performance parts for this model. In fact...
Hi Suzie.....I don't think it is that easy. I don't know of any aftermarket bolt ons for your 150, since the aftermarket people are more interested in...
Hello Robert, I have a CB100N frame that has been retrofittet with a CB125S engine, and i think that this would be the easiest solution (engine fits perfectly...
Hello all, I am still working on my CB125S restoration (i really should post some new pics, it already looks quite different now). I am polishing my front...
Tahnks for the info. I think, i will get the spare barrel re-bored to 125, and try it. Looking at the figures there isn't much difference in the performance...
Hello, What happened to the web site? Is there anyway to get some of the content? I constantly used it as a reference on many bikes. Speaking of which, I have...
banzaibob
BanzaiBob@...
Jul 11, 2003 11:17 pm
1702
Hi all; New to the group. We have recently acquired a 1974 CB125, in _VERY_ good shape, that was not charging the battery. The rectifier tested bad, so I...
If you have a understanding wife that doesn`t mind you useing the oven to cook your parts and doesn`t mind the smell of old fishy fork oil use sodium silicate....
... These Group should an Alternative for Members all the other Groups, that up to now in each case only with the Exhaust Fetish, Exhaust Fume, Motorcycle and...
Find your date from tens of thousands of single millionaires here! You don't have to be a millionaire. Free registration. http://www.MillionaireMatch.com/i/10...
A 1986 japanese bike and little cc's is going to be hard to find just stock parts for. Putting racing parts in it might even destroy your good running bike...
My best friend showed me this site that she had just found. We are always hooking up with the people from this site. There are members from all over and its...
