Greg, The trim on my generator tray is separate from the rest of the trim, looks factory? However, to slide out the generator I have to unhook the exhaust...
... Tom, After all the years of fumbling with cars and motorcycles, I've gotten pretty good at getting mixtures dialed in--especially with a screw-mainjet like...
From my limited reading and knowledge - i have come to understand that the stock alternator on our coaches are in the 60-65 amp range. As the alt on my Blazer...
Greg, It sounds like you've got your bases covered. It certainly could be a failing fuel pump, or plugged fuel filter. You probably already know this, but for...
I just got home from a 2 week business trip to fabulous Las Vegas, where nearly every casino has an RV park, as well as many that aren't run by casinos. After...
greg -- this may sound overly simple and perhaps you already did it but the gen set on my 84 duke ran like this--i took off the bottom of the fuel pump where...
Mark, On mine "82", there is a 2 wire plug on the motor and if I remember corectly 1 wire is forward and the other is reverse, frame ground. Mine has a set...
Bill, I had mine "82" looked at by my friend at his electric shop, I don't know if it was orginal or not, but it was a 37 amp. He up graded it to 90amps. He...
Thanks guys, for all the input. I'm tickled pink to learn I can plug my Revcon into itself and run everything. Jay, definitely NOT too much information, and I...
Greg, I don't think it's been mentioned, and I doubt you overlooked it, but there's always the air filter and choke which can cause black smoke if clogged or...
Tom, it seems we are getting rarer all the time. I watch Trader online regularly, and I've noticed the count has gone down to about half of what it had been...
Tom, I was checking out your site again yesterday (very nice) and noticed your stuff about REVolutionary CONcepts being the root of the name of our coaches....
Thanks to everybody for the responses on this. I don't think my fuel pump has a filter...or at least I don't know where it would go. My pump looks like a small...
MARK: THE FACTORIES DON'T DO IT AS IT IS QUITE AGAINST ALL THE CODES THEY MUST COMPLY WITH. LET ME THANK ABOUT THE ELECTRICAL HOOKUP SOME MORE, I'LL LET YOU...
Greg, There is a filter inside the pump housing, it's a metal (brass I think) filter element, not paper, and it's not a very good filter. Onan recommends...
Mine was built in '79 so it is likely different from yours, but mine does slide out. There are 2 retaining bolts that hold the Generator in place. I took...
I found this one with google. http://www.chooseyouritem.com/rvs/files/68000/68404.html Sure enough there is a Revcon in the movie, but it's only there for a ...
In trying to bring my motor back into shape after having the heads and exhaust manifolds remachined, I now have found that the intake manifold (cast iron) has...
Tom, I simply have to know what "business trip" could last two weeks in Las Vegas. In fact, I'd like to know how your wallet lasted two weeks in Las Vegas....
Hello, I am new to this and just bought a 1983 Revcon king 33. I love it and what a deal $4000.00 in great shape. When I put water in the holding tank, it runs...
Hi, Welcome to the Revcon site. In my '85, there is a plastic shut-off valve (round faucet-type handle) near the tank, inside one of the compartments. It...
Welcome, In my 84 Duke 28' the valve is under the bed behind a door in the base of the bed. I have to lay on the floor and stretch my arm out a few inches ...
Hello Don, Welcome aboard, and congratulations on what sounds to be a great deal! If you're able to post pictures, we have another site for that (we filled up...
Here's an interesting bit about determining the correct tire pressure one should use, written by a guy who oughta know. It was posted on the Vintage Airstream...
Norm, All oder V8s have what we callked a heat raiser passage under the intake. It is there to keep the carb. and intake warm in cold weather, there is...