Lyle http://www.redneck-trailer.com/ This is a trailer parts house that I use for all kinds of acc. Should be good for rear axles. They do stock goodyear 16.5...
I have tried to answer Marcus' post 5 times over the last 3 days, even tried to start a new thread. It simply won't post, even though it say the message is...
Use a quart of STP instead of VR1. It has the needed ZDDP to bring the oil back to the old standard. See if this posts Dave ... days, even ... it say...
Since the valuable stuff got posted, let me say what else was in the post. I have never been a fan of Mobile, as they were always in direct competition with...
OK, new topic. I've got a lot of noise and some intermittent vibration that seems to be coming from the right front. Took it to the alignment shop today, the...
-Eric Just did new wheel bearings in the front. I got them from Marty. You have to use a bearing separator puller to get the hub off. Not an easy job to...
The 950 mile trip with the ole gal was uneventful. I have driven other motorhomes of all classes and must say that after having this one restored to new...
Uneventful, that's no fun. AS far as pining goes, I wonder if bumping up the mixture slightly may help. The more timing you have, the more fuel you need. More...
When I did my front end work, I pulled the hubs and dropped them off at the local driveshaft repair center. I let them separate the hubs and replace the...
When Stan talked about his trip, it reminded me that when we came home from Christmas, we had some interesting weather. I thought I was going to be ahead of...
Thank you for the tips, Kurt. I'd have never guessed that about the fridge! I feel as if I'm already benefitting tremendously from this group, and that's a big...
Thanks, Lyle. I think those slant-noses are pretty cool machines, too. Cheers, indi ... -- WARNING: This message may contain sarcasm, dark humor, disagreement,...
Thanks for the tip, Bill. Sounds like you'll have a mighty stylish casket when your time comes! Cheers, indi ... -- WARNING: This message may contain sarcasm,...
Thanks, and thanks for putting those through, although at this point since the question has already been answered, we probably don't need to clutter up the...
... You're darned right it's bad, nothing is worse then a case of Short Timer's Disease... hehe.... (presents in government workers close to retirement...) ...
Question, I am running Amxoil Synthetic in min, when it runs. Should I add STP or since it is synthetic, does it contain the ZDDP? Thanks, Bill ... From:...
Another question - has anyone recently seen a fuel pump failure on your rear electric pump? Originally my coach had a AC EP42S electric pump, well over the...
owned a 1976 Revcon 250 for over 25 years and put 200,000 miles on it. Never the less I believe the 290 which I observed many many times, and was under a...
I run a Carter feeder pump. Pre FI I got rid of the mechanical pump and only used the Carter pump in the rear. Before that, I never ran the original pump. It...
... You know, that is an interesting thought. The mechanical pump was recently replaced as well as the old one had a crack in the casing (have no idea how it...
I'm going to try to make this short since my longer explanation didn't post again. Maybe I should take the hint. Anything with API certification has a lower...
If it has an API rating, it has reduced ZDDP levels. The automotive Manufacturers are required by the EPA to meet minimum longevity for all emissions devices....
Dave-- There i something about your posts (maybe an invalid e-mail addy?) that cause Yahoo! to tag your posts here as spam..I approve your posts as fast as I...
Hi Eric. My fuel pump failed a few years back and I replaced it with a Wagner which was OEM on my rig. Seems to work fine but it was pricey, $130. I have...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
