You know we normally talk about what to do with buses other than the RTS but this is a Bus Converter with a problem. I called Mike and told him what Pete...
First I want to thank Jeff, Dennis Cook, Mike Carrigan, and Ed Carroll for calling and trying to help me with my starter problem. Now for an update. After...
Thanks to everyone for their advice and input. It turned out that the starter had gone out on it. A remanufactured one has been installed and is working fine...
Reminder from: RTS-bus-nuts Yahoo! Group http://groups.yahoo.com/group/RTS-bus-nuts/cal New Members: Please Read Wednesday April 4, 2007 8:00 am - 8:00 am ...
RTS-bus-nuts@yahoogro...
Apr 4, 2007 11:44 am
17603
Just an observation. Someone posted a problem with (hands to face in shock) an MCI. This is not an MCI group but people helped out. This makes me feel good....
HI I have Delorme GPS-18 - nice package and you can give it voice commands (where am I - pan out / pan in / etc ) but not on a noisy bus - It used a lot of...
How hard is it to convert wedge style brakes to S-Cam style.How about gears to get more speed, my top speed now is 65 mph ( the speedo reads 70) I guess im...
Anything is probably possible. I myself wouldn't go to the trouble as my brakes work fine as is. Then again, I just putt down the road so don't have to scrub...
ooops - Delorme is LT-20 (that's the one you can voice command) My GPS-18 is Garmin (will run on Win98 also) - has some nice features it use NRoute maps Pete...
Didn't Geoff or someone say the right bank of Jake Brakes would not fit in the engine compartment without cutting out some of the back interior? Not enough...
Hi Jeff, I have a Jake in my RTS. The valve covers are different for the Jake. I had to make some changes but now it works great. When I activate the Jake,...
wulf p ward
wayward@...
Apr 10, 2007 2:35 pm
17614
Reminder from: RTS-bus-nuts Yahoo! Group http://groups.yahoo.com/group/RTS-bus-nuts/cal New Members: Please Read Wednesday April 11, 2007 8:00 am - 8:00 am ...
RTS-bus-nuts@yahoogro...
Apr 11, 2007 11:44 am
17615
greetings gang from our discussion a few weeks ago concerning the best treatment of plywood being placed underneath the coach, here's me findings. bought...
And I have a pallet load or two of radius rods with bushings installed, so do yourself a favor and don't pay retail until after my parts pile is cleaned out of...
John only straight axel RTS's use front control arms ?? Front lower control rod asm - 15504906 (RTS 06) and beyond ? Front upper control rod asm - 15504909...
83RTS 35'w/wheelchair lift. want to keep rear door and block off front door,take out steps, make floor same height. does anyone have any suggestions or has...
Ha ha! very good Pete! I believe that the tiny numbers found on some of the units are different than your list, so when you stop by for your yearly summer...
hi chuck been working on my 'bub' for about a year now and, the first major task was to close off the front door. if you click on the links section and go to...
Hey guys, if anyone has any advice on the right front kneeler I need some advice on it, it seems to be stuck in the down position and I am lost as to where to...
My plan is to replace only the bad sections as I have removed the original rubber flooring (miserable job!) so the areas needing attention are visible. I plan...
It appears that Gadget and Garhawk are both doing similar things to your goal. Gadget's can be seen in the photos section. My congrats to both as I would...
This will work in the short run, but after about 20 years, the wood just disappears. It rots inside the resin, as plenty of boat owners found out. For what...
Most of the cases that I've known about used asphalt for a sealant, including these buses. The main difference has been the consistency, that is, how much...
hi john b forgot to mention there are pics in the photos section as well as the links for the t'berry rts. floor plan is on architectual size paper. will post...
The problem in boats is NOT the wood but the application and installation. In my experience working on customers boats, and I have worked on 50+ year old...
hi Gary, Thanks for the pictures. I will probably be calling you when I start the project. I appreciate the offer of help. Thanks, again. Chuck garhawk...
