David, A gauge SHOULD be used to set the tension on the timing belt. You can usually find one on ebay for $20-$60 by searching for "Belt Gauge" or "Belt...
Ralph was kind enough to add a copy of my TIII Cam Cover Collection. Top is a NOS Dodge Cover, Middle is a Shelby 16V cover and Bottom is a Chrysler-Lotus...
Thanks for the plug Ralph! The BOV kit I offer is made to fit the Spirit R/T, Iroc R/T and Phantom R/T. I make it a 100% direct bolt on fit. The new (much...
Hi everyone, Well it only took me a month or so but I finally got the timing belt changed on Dr. Z, my White 1992 Spirit R/T. The front bolt that holds the...
I hope this doesn't violate any list rules or stir up any anger, I wanted to let you guys know about a project we received permission from Chrysler to do. 2 of...
I have 3 used and no longer serviceable "STOCK" T3 pistons up for grabs. They were removed from a IROC R/T which saw a little too much boost which caused...
hello everyone, I am going to need to overhaul my t-III before long and was wondering what options we had for buying parts. is the fwd performance site the...
Hi Ron, RDI Performance (my company) has a full line of parts available for the Turbo III engine including MLS (Cometic) head gaskets, ARP head studs, rings,...
Ron, A couple other good places to get part for our cars is: Rick Diogo at; www.RDIPerformance.com and Chris Wright at www.TurbosUnleashed.com They will even...
Ralph- Good point on the oil starvation issue when removing the shafts...I forgot to mention that. Some folks just install an 89-90ish common block 2.2 Turbo...
92 Iroc R/T Indy Red with Fresh beautiful paint, upgraded V6 Radiator, Upgraded front mount intercooler for the Lancer Evo, and the smallest the exhaust gets...
+1; I agree it is pretty common to just strip out the teeth on the timing belt at the crank. THIS is where the Titanium Valve Spring Retainers make it worth...
+1 for what Kelly said. The belt probably stripped teeth off. Chris 93 IROC R/T mag318racr@... wrote: Adam, it's pretty common for our T3's to strip the...
Like Kelly said. It's not the first time some one has posted with the same symptoms. Replace your belt and you'll be back on the road. Just in case you don't...
Hi everyone, First off, thanks for all of your help with my timing belt. I have never done anything that big before (I can hear you all chuckling now!) and I...
Hi everyone, First off, thanks for all of your help with my timing belt. I have never done anything that big before (I can hear you all chuckling now!) and I...
Thanks for the info and help. Definetly the teeth stripped off the belt at the crankshaft pulley-it's raining here in PA right now so it will probably won't...
Anyone know where to get one? Dealer is out and when they searched other dealers...nothing. Pretty much pursued everything locally and couldn't find it on...
I'm doing a full rebuild on my 93 R/T and I took it down to a machine shop and the guy can't get the crank pulley off. I was wondering if anybody else ran into...
If its similar to the 8-valvers.. http://www.turbododge.com/forums/f4/f14/134978-how-custom-crank-sprocket-puller-easy.html This is, assuming it is the timing...
Yeah I ended up just taking it to a place around town that have dealt with this problem. They made a puller for it as well. It was a little expensive ($45),...
Hi everyone... I am redoing the front brakes on one of my '91 R/Ts. Can't get the calipers loose. Any tricks, tips, or spells would be appreciated. Peace, ...
Last week I changed the timing belt. The last few days I have noticed a sluggishness btw 2000-2250 rpm that continues up to about 3000 rpm, then it gains power...
The hiccups at 85 and 100 could have been the car reaching overboost (code 45) and cutting fuel. You probably have a vac leak contributing or causing that...
I just received a Invitation from Carlisle to Display my car in the Invitational Buildings ("T" & "Y") at the All Chrysler Carlsile Nationals on July 6-8. This...
Ralph, Hey, nice job. Hope you have a great time inside and out of the sun and heat. Cliff Ramsdell In a message dated 6/7/2007 9:57:01 P.M. Eastern Daylight...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
