Attila: I think the shield ground you are referring to is db9 pin 5 which connects to OBDII pin 4. Here's a link to the TINI folks at Systronix. Their...
My opinion is that you should not add an extra bus termination when plugging something in to the diagnostic port. This would apply both to your experiments...
I am also interested in the Miniscanner. And like Ken, I am also an ME. But my main function is Project Management, mainly new product development projects....
I looked thru some old downloads from the Toyota paid site. One page headed "BODY ELECTRICAL — MULTIPLEX COMMUNICATION BE-4 CAN (CONTROLLER AREA NETWORK)"...
... [Ken] Hi Dan, welcome to the group. ... [Ken] Just a point of clarification, my degree is ME, but I have never worked in the field. I've only done...
Ken, I would recommend using MS Project for this project. This will enable us to understand the how tasks are linked together and capture estimated task...
Has anyone had any experience with this CANUSB for $100. http://www.canpic.com/ It seems to require only a cable & plug to work with a laptop or pda. The...
... capture ... [Ken] OK, let's give it a shot. I will be updating and adding tasks to the project plan in a couple days. I will email you with the info so you...
... info so you can put into into MS Project form. Ken, I am ready whenever you are. It would help if you could take a crack at explaining what tasks are...
Hi, Yes, we have looked at this option and decided to try CAN232 from http://www.can232.com/can232_v2.htm since it had a bigger CAN FIFO buffer. Somebody may...
I spent some time with a digital oscilloscope and looked at CAN_H and CAN_L. I posted 2 image files from the scope in the Files section, I have a lot more...
... Poll ... [Ken] Whoa! Sorry about this Norm, it looks like I forgot to reply to your note. I just saw it when checking my old mail. [Ken] I am not too...
Ok, finally, I got it going. It must have been a combination of things, including my OBD2 connector hack / not quite appropriate wires and some SW settings for...
Folks - In our quest to unravel the mysteries of the wonderful Prius, we have begun to hash out the technical requirements for the Miniscanner Mk III. But,...
... [Ken] Woohoo!!! <snip> ... the ... month ... [Ken] So, do you mean that it was missing CAN frames, or not able to create the 232 fast enough? <snip> ... ...
It seems that discussion has tapered off, so I assume everyone is done discussing the requirements. I have summarized the results below. I realize that I may...
In my previous report on this subject, I stated that I needed to verify that I am able to debug a program written in C and compiled with GCC on the actual...
I ran a quick data collection and analysis, please see below. I was not recording the frames just analysing; I wanted to get a feel on the traffic. I'll be...
... It's great. I have my own speedometer ( with history ), if the cops stop me, I can show'em ... Ok, now I know this is quite superficial, but fun with very...
I put up an excel file named PriusCodes.xls in the files section. The values I filled in are from direct measurement / analysis done by me so far. Thanks for...
The following received little or no discussion since last time, and nearly dropped off my radar. I have made decisions on these items that I feel will keep...
Enter your vote today! A new poll has been created for the Prius_Miniscanner_MarkIII group: Do you accept or reject the Miniscanner requirements as listed in ...
Prius_Miniscanner_Mar...
May 11, 2004 8:15 am
178
Great job Ken, thank you for all your work. Larry ... From: Ken [mailto:prius__postus@...] Sent: Tuesday, May 11, 2004 12:55 AM To:...
A poll has been created and is accessible at http://autos.groups.yahoo.com/group/Prius_Miniscanner_MarkIII/polls This is a poll asking you to accept or reject...
I received the project schedule from Ken in an HTML format. I will put it into a MS Project format today and post a PDF to the files section no later than...
Attila: Great progress! Have you actually confirmed that these codes are what I've posted? As to your other question, i would presume that the high rate codes...
Ken If we delete requirement 3.d. then we could delete the requirement 6.b for outputing unscaled data. Norm ... and ... to ... since ... available ... may ......
Hi Fred, ... Yes, the ones I put on this worksheet 100% came from my reader. I wrote a program which displays only the targeted message ID's data traffic and I...
I created a folder called 'datalog' in the Files section and posted a couple of my recordings from this morning... Feel free to analyse it... I also put up a...
