Anyone out there got a petrol cap to suit an early model 140 floating around in the shed or on a "parts car" or something? It's for a 1969 model, but I guess...
Hi Guys. I have a 1980 242GT for sale (in Perth), needs work, but it's not bad, unlic, complete, $500ono If anyone's interested, drop me a line, if not, I'll...
I would say Quokka also ... From: Paul & Bec To: OzHotVolvos@yahoogroups.com Sent: Sunday, June 10, 2007 5:49 PM Subject: [OzHotVolvos] 242GT For Sale Hi Guys....
Hi all, I am after an original Volvo boot spoiler, not the soft rubber one - but the hard one that clips onto the boot of the 7 series sedan. If any one has...
The rally car has totally killed a (previously) good set of rubber inner control arm bushes in three rallies. I know you can buy Nolathane/Super Pro bushes,...
if you make em out of delrin the rigidity will make you crack the control arm. Nolathane werent that dear if it didnt have the "nolathane" brand on em. I found...
Delrin is probably a good idea - I'm not familiar with the front end specifics on the 164 or 14x but I'd probably go for a mix or Delrin and oem style rubber. ...
delrin is like a totally rigid nylon style plastic isnt it??? wouldnt you then be relying on the grease between the delrin and the tube outs & bolt?wouldnt it...
Unfortunately Noltec no longer stock the lower control arm bushes for 140/160 cars , even though they are still listed in their catalogue... or they didn't...
I bought some in '05, I had to wait about two weeks for Noltec to make up a new batch. They fitted the control arms nicely, but I haven't driven the car since...
Thanks for all of the replies. Definitely something to go with. It has killed both the upper and lower bushes, but the uppers have suffered the worst. I was...
Maybe I'm biased and maybe they've improved since my experiences, but I'm not a fan of urethane bushes. Had urethane bushes on the lower rear arms of my 144...
on my 144s i replaced the lowers with standard rubber and upper with eurethane. That worked well on my road 144 so have done the same on my track car (also...
Does anyone have the 'Road and Track', 'Car and Driver' type graphic that depicts an outline of the car with the engine and drive train in blue or Grey? May...
Hi guys, Anybody point me in a direction to get a new Bosch FPR for my B230 turbo motor? I can smell a bit of fuel in the vac. line, and it looks a bit gummy. ...
I recently did all the bushes on my 164 with Eurathane bushes, can't remember the brand, got them thru my mate who runs a 4x4 workshop, was only a couple of...
Ditto my 68 145s and 74 144.. Changed the complete front end on the 145 to a latter model one. But.. No worries at all. I think we did one of the 164's over 10...
Well, the one quote so far was $200 for both sets of Noltec inner control arm bushes alone - and that was (apparently) trade price... Anyone know where I can...
Is that for both upper & lower arms ? I paid $48 for a set of Noltec upper arm bushes last year from a place in Hoppers Crossing (Autopro? - Angus would know,...
$95 for the upper, $105 for the lower. On hte bright side, I just found out that my nav's partner is in a very good position to sell me bushes at a good price,...
$105 for a set of urethane lower bushes is dirt cheap (compared to SuperPro at $250+ a set, or even rubber at around $80 from memory) Maybe my uppers were $48...
Chris, there available from eg 'AutoPro' network as they are official Bosch Dealers. If your a CAMS official you get 10% off Bosch products. Would be a bit...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
