I know others have done this but I couldnt find any specifics. I finally decided which of my 4 vehicles I'm going to match my trailer to. With that said, I...
[insert Ben Stein voice from Ferris Bueller's Day Off] Class, class? Anyone, anyone? [remove Ben Stein voice] OK, we've only got a few takers and we are still...
NAPA has shocks that are perfect drop in replacements. NAPA Reponse 94038. They come with bushings, ready to go. Only problem was that they came in dark blue,...
Has anyone had troubles getting in the hub seals? I pressed in the new races OK. I've already gone through 4 seals and at 5 bucks a pop this is running the...
If I recall correctly the M416 tub size is 49 wide x 72 long. I've seen the M416 canvas go for $100+, the M101Cdn camo cover is running about the same....
Glad it's not just me thats had this problem. I had to wire brush the hub and used a hydralic press to get them in. I hit the inside of the hub where the seal...
Beachwood Canvas makes both canvas and vynal tops for M416's/ CDN M101's, but they arent cheap. They are of excellent quality though. www.beachwoodcanvas.com ...
All this trouble for a $5 seal. Perhaps I should just do a hub swap for an additional few hundred $$ ;-) Can't afford that! I'm going to call Standen's and...
I had no problem installing the timken seals I got from Autozone. I used a bearing/seal driver but I dont think it was necessary. A block of wood and a tap...
The tongue on my trailer is a bit low for my landcruiser. Rather than buying a new, adjustable height pintle hitch, I would like to just raise the pintle on...
Jared, I put the ring on the upper hole and it matched my truck hitch perfectly. It's very easy to do. Remove the cotter pin, remove the nut (it's not under...
You can move it to the top hole with no problems at all . The only thing you really need to do is clean the hole of paint/dirt/rust , grease it up , install...
Trust me, use the hydralic press..... I went thru this already.. took me a few destroyed seals with the "block of wood and hammer" technique before I used...
Timken Seal #442251. Went in easily. A small lightweight hammer 'linked below' with a hard plastic face is great for getting races and seals started 'straight'...
Well, actually as you were typing this I was already down at my local AutoZone. It took some time of flipping thru books, cross referencing, and pulling items...
Not knowing what your traveling environment will mostly be FWIW if you search the MESSAGE archives someone posted how the seller set up the lunnette to be...
I know exactly what you are describing. Mine is a little different. A single sealing surface and no spring. It's a very basic seal but for this purpose it...
GREAT set up! Who's is it? I'd like to know more about the whole set up: 1. outside looks to be lined (colored rhino or line-x?) or heavily textured paint? ...
I have no idea's who owns the tentrailer. It was seen down at Aberdeen MD last weekend. The outside and inside was colored Line-X Dont have any other pics,...
Glad to have found this group. I imported 7 units to Guatemala, and kept two (4 from TNJ Murray, 3 from some Canadian outfit). Changed the hubs on one, to...
