If you are making it from two pieces, put an aluminum piano hinge down the middle and attach some reinforcement under one side of pop rivet fasteners that will...
Why are you trying to make a bonnet from two pieces of aluminum. Unless you put a full length hinge in you will have major problems with it. Aluminum is not...
there are many different grades of aluminum, the most mealable is 3003-H14 I bought a sheet of .040 4'by 12' for 105.00. i cut rough parts out with a plasma...
I am not trying to make a 2-pc hood. All I want is square tubing edges at the body joint with one containing the hole for my exhaust in 2 pcs. (top & btm)...
My comment about 2 sheets referred to all the ally I bought for the car. No 0.060 included Just (2) 4 X 10 sheets of 0.040 KW ... From: Esko Ala-Nisula...
Anybody here using a Toyota T-50 with an electronic speedometer? GM/Chrysler vehicle speed sensors have a 7/8-18 fitting.... and the T-50 has some metric sized...
Now Now George.... LOL ... From: George <geo1129@...> Subject: Re: [Locost_North_America] Re: Hood arches???????? To: Locost_North_America@yahoogroups.com...
Found a possible answer in a very old message from Dave Witt. Still would like to find a 90 drive though: The pulse generator that I got from CFI for my T50,...
Good evening everybody I just pulled my 7 project back out of storage after about 3 years. I left off at the front suspention. I don't want to make my own...
Hello Tony, Glad to hear that your back to building your 7. As for front end arms you can get them from Jack McCormack at Kenitics. I am sure he still is...
Hi Tony, Here is a link to Jacks company. http://kineticvehicles.com/parts.html Hope this helps. Martin Keller Ventura, CA. Hand Built Replica 7 ... [Non-text...
I am. the problem a hall effect sensor is long enough to hit the frame sides. I am not sure what to do.John ________________________________ From: Ed...
johnehorton@... wrote: I am. the problem a hall effect sensor is long enough to hit the frame sides. I am not sure what to do. As my engine/tranny are...
Marty- His name is spelled with an N ( McCornack) FWIW ... From: Martin Keller <MHKflyer52@...> Subject: Re: [Locost_North_America] control arms To:...
johnehorton@... wrote: I am. the problem a hall effect sensor is long enough to hit the frame sides. I am not sure what to do. John, here is a thought...
Ed, "I've Heard" that you can pull the transmission sender from any electronic speedo Toyota transmission, such as a W55 (Truck) and put it in place on the T50...
I like the GPS idea. ________________________________ From: Don <tvrvixen@...> To: Locost_North_America@yahoogroups.com Sent: Thursday, April 2, 2009...
Oops my bad but at least I got his company correct and the link correct....Jack is most likely laughing and shaking his head but smiling as usual.... Martin...
We have a total of 9 Se7ens (and one Cobra and maybe one Elise) scheduled to attend at this point. If anyone else is interested in attending please let me...
We have a total of 9 Se7ens (and one Cobra and maybe one Elise) scheduled to attend at this point. If anyone else is interested in attending please let me...
Don wrote: I thought you were just going to use a GPS as a speedo? Think I commented about how nice a gps would be in my Esprit to track the amount of...
I have started forming the panels and finding out some things it might be good to pass on for anyone that are approaching this stage. The side panels were...
If you are making the bonnet of 2 pieces,you could always bend a 1/2"or 3/4" flange down then rivet the two halves together with or without a hinge in the...
Nope, just one piece. I stated that the only source of the ally for the car was the 2 pcs 4 X 10 of 0.040 stock, which means the hood comes from that stock...
Keith Williams wrote: Nope, just one piece. I stated that the only source of the ally for the car was the 2 pcs 4 X 10 of 0.040 stock, which means the hood...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
