First off, I'd check for a vacuum leak. Try with the engine running, spraying a little carburetor cleaner around the manifold. Also I'd check for a bad spark...
... As usual Bob comes to the rescue!!! I'll get on and check those out now! As for the spark plugs the ones that i have aren't even 2 months old yet!! But...
If you have changed the manifold, that's the first place I'd check, those "o-rings" can slip out of place really easily. Don't waste your money on a spark plug...
... as for the manifold the guy who had it before me changed it, so not sure about the o-rings, but i do know that before i went to baildon warm her up she ran...
well, it could be the coil, but it could be a bad connection or a bad ignition module. Carefully swap the coils and see if the problem follows. Also don't ...
... the only thing i find weird is that when you give it some throttle and get it to i think roughly 3-4000 rpm it starts firing on both, then if you keep it...
... The bikes now running brilliantly again, cheers for the help bob! IF your ever in the UK defo have to buy you a pint sometime haha! Thanks again fella ...
On 09/09/2009 05:23, dj2hardrock wrote: The Yamaha Virago 250 later model brakes are the same. The part number is: BRAKE PAD/KIT 4HM-W0045-00-00 front rear: ...
Have you checked for that vacuum leak? Since you said it was changed, I'd look there first. Also maybe you can find someone with an ignition box to try...
Last night as I was riding home from church,I noticed that my headlight seemed to be more dim than usual. When I got home I tried to restart and the battery...
Roger, make sure the battery is fully charged before checking. Put a volt meter on the battery, start the bike and measure the voltage, on the battery with the...
Thanks Bob-------------------------Roger ... From: Bob Francis <bobf@...> Subject: Re: [Lifan] charging system problem To: Lifan@yahoogroups.com Date:...
I adjusted my valves based on a Yamaha 250 shop manual and it seems as though they are a little noisy. I checked and rechecked my clearances and they are...
While the engines are almost exactly alike. The Lifan factory calls for smaller valve clearances. The specifications are on the EPA tag on the side cover of...
Trying to adjust my valves and I'm going by the timing marks listed for yamaha Virago 250...They are the same for the Lifan 250, no? The II- is for the back...
RJ, RE-read the Yamaha instructions. The double line is TDC for the front cylinder. The single line is fo the rear. The instructions are hard to read so...
RJ, I need to reexplain the markings. There are 3 three markings on the rotor. 1) A"T" that is the TDC mark for the front #1 cylinder,( yes I know that in some...
I rode up to Cave City on Thursday morning. A short ride 130 miles north from Murfreesboro. The closer I got you could see rain clouds off to the N.W. I...
Well guys, you should have come! The Lifan did us proud at Cave City. I rode up from Virginia, about 420 miles or so. Left Friday AM and other than a flat...
Sat morning still sore from the cave hike, Rain & fog at the motel. We will put off the ride for a few hours. More folks arrive before 10.00 am. I hear the...
Thank you for joining the Lifan group. This file "groundrules.txt" is available in the Files section of the Yahoo Lifan web site and is sent to all new members...
Lifan@yahoogroups.com
Oct 1, 2009 2:28 pm
3113
_www.barbervintagefestival.org_ (http://www.barbervintagefestival.org) Worth doing if your in the area !!...
 This email is to let you know that I am a real person, and not a "spam=bot".  Thanks, Jon in Puyallup, Wa. USA This email is to let you know that I am a...
Yup I'm a real live " older " guy.. Retired U S Navy living mostly in the Philippines on the Island of Panglao.. Beautiful beaches and world renouned scuba...
Thank you for joining the Lifan group. This file "groundrules.txt" is available in the Files section of the Yahoo Lifan web site and is sent to all new members...