Thanks for the info. I'm actually looking for the spring sag settings. I softened it up a while ago to shorten up the rear so my wife could ride it and now...
Hi boys... Sorry my english is very bad :P I have a KTM DUKE II 2000 and until now everything was good. Now i have a big problem. I found some oil leaks on the...
Looks like a dowel is missing, the parts book doesn't really show it. Size is 9.8x7x10. Part # is 490 30.090 000. At some point someone probably pulled the...
Thanks KD, i found it. One more question, do you know an online ktm shop in europe where i can buy oem and aftermarket parts for my duke because in romania we...
I'm in the US, but a lot of guys use KTM Sommer in Germany. Try this page http://www.ktmteamwest.com/website/index.php?option=com_content&view=article ...
My 2000 Duke II was missing the same part. I was scared that it had fallen into the crankcase. After searching microfiches at the dealer and talking to the...
http://www.ktmteamwest.com/website/index.php?option=com_content&view=article &id=88&Itemid=120 This will give you a phone #, and the page is in English. I also...
Kip maybe you`re right, i try without dowel but in time i loose the screw because of vibration. I`m also scared that it had fallen into the crankcase. My...
After it was finished the mechanics call me to take my ktm because the engine doesn't start and nobody knows what`s the problem. They maybe don`t know how to...
Battery is good. Starter is spining but when engine want to start something is going wrong and makes weird metal sounds and stoping the process. If i use...
... = very likely the sprag clutch needs replacing. This is the one-way clutch that connects the drive from the starter motor to the crankshaft. On Dukes they...
I have had repeated starter troubles with my 2000 D2 that sound like the problems described. The culprit was stuck brushes. I disassembled the starter and...
... Carefully push the brake caliper pistons back into their boars,I like to use my thumbs for this but a C clamp works as well.You may have to remove a litle...
Looking for tail piece/rear fender to fit 95 D1. The same part from an RXC of the same vintage would also fit. KTM part no. 583 080 131 0082 Anyone have...
... If you are after a non-painted part, they really are quite cheap from a dealer and still available. At least they were last time I needed one. -- Nick...
... My first Duke was stolen at 19,000mls and was still on the OE clutch. I'd never had any trouble despite London stop/go use in traffic and a lot of slipping...
I got ~11K miles out of mine before the coolant that leaked into the gearbox (due to a failed water pump) caused the cork plates to disintegrate. Aside from...
01 Duke2 56,000km on the clock, clutch is just starting to slip when cold ... From: Tony Sleep To: KTMDuke@yahoogroups.com Sent: Monday, June 29, 2009 9:36 PM ...
Am only in 10,500Miles - good to know its still good. Am not a wheelie fiend hehe From: KTMDuke@yahoogroups.com [mailto:KTMDuke@yahoogroups.com] On Behalf Of ...
Thanks for feedback! From: KTMDuke@yahoogroups.com [mailto:KTMDuke@yahoogroups.com] On Behalf Of kgebhardt23 Sent: Tuesday, June 30, 2009 5:56 AM To:...
I only see weld on mount kits on the Scotts site for the Duke II, too bad because I have a damper and bolt on mount from my 2002 KTM 200EXC in the basement. I ...
I've emailed the folks who own the site here: http://fatbikez.com/scotts-performance-ktm-duke-and-duke-ii-2001-2006-steering-stabilizer-kit-.html To see if...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
