Greg, Let me suggest a couple of things to try: 1st - make sure that the positive battery wire and the large wire that goes to the dynastart main post are now...
HI all This Board has been such a help with my isetta questions..I have a off topic question that i wouldn't normally ask here but i have no other ideas.....I...
As I reassemble things I'm now at the shock absorbers. They're all there, but they're 50 years old. Should I have them rebuilt, should I rebuild them, should...
Hi All Have any of you experienced bubblers got any information on the RHD balance weight, I believe the weight is 27kg, but what about the dimensions, has...
HI Paul If the casings and shafts are in good condition go ahead and have them rebuilt. I had a friend rebuild mine but he has since sold the business and the...
I USED A PIECE OF HEX STOCK FOR THE SHOCK TOOL . THAT WAY I CAN USE A WRENCH TO REMOVE THE CAP AND TO RE-TIGHTEN IT . -RIMSPOKE- ... From: mark sebolt...
ANOTHER ARTICLE WAS DONE ON MY CARS IN THE LOCAL NEWSPAPER . THEY SEEM TO DO A PIECE WITH ONE OF MY STRANGE CARS EVERY COUPLE OF YEARS BUT THIS IS THE FIRST...
That sounds very clever there Don. By hex stock do you mean a ruddy great bolt or some Hex Bar that you cut and drilled? Where did you get the replacement...
... use ... Hi Malcolm Weight is 21.5 Kg. I have added some photos to the Gallery under Counterbalance Weight. Includes a Tape Measure so you can get size. The...
Hi http://cgi.ebay.co.uk/BMW-ISETTA-NEW-BRAKE- HOSE_W0QQitemZ260295154106QQcmdZViewItem? hash=item260295154106&_trkparms=39%3A1%7C66%3A2%7C65%3A10%7C240% ...
Don't you just love the creativity in this group!!! ... From: "mark sebolt" <marklet2002@...> To: <IsettaWorld@yahoogroups.com> Sent: Thursday, October...
Hello, I had that problem for almost a year. I changed regulators once the Dynastart and had the same problem after a while. The BMW guru, Bruno from BMW...
With 1960 feedbacks and a 100% score it would appear that the buyers of his items are happy enough - when they buy them . Maybe they fit well and last well -...
Hi Terry. I must admit I did not join the IOC when I got my British built Isetta for two reasons, firstly the car had already been recently very nicely...
Watch out about feedback. Italianmetals feed back isn't 100% but it is good and we all know his products are junk, if even that. I don't understand how that...
... Me neither. Please send a copy to me at chasgould@.... Thanks, Chas ************** New MapQuest Local shows what's happening at your destination....
Reminder from: IsettaWorld Yahoo! Group http://groups.yahoo.com/group/IsettaWorld/cal North Yorks Moors Railway Wartime Weekend Saturday October 11, 2008 All...
IsettaWorld@yahoogrou...
Oct 5, 2008 11:57 pm
4358
Can I slip another wiring question in here...? Parking lights work fine, but directionals are buggered up. Oddly, they seem to work occassionally. On one...
You probably need to clean your contacts inside the switches. See if that helps. It could be there is high resistance at the switch causing the fuses to...
Mike, You might have to disassemble the turn signal switch to make sure none of the wires are grounding out against another ?? Also, clean up the little...
Hi Steve I haven't recieved a copy. Bill ... From: bmwbubble <bmwbubble@...> Subject: [IsettaWorld] Re: MMCN Issue 38 To: IsettaWorld@yahoogroups.com ...
Many thanks for all your suggestions. I replaced the generator relay with a VW one as suggested and this worked a treat. Cost £29.65 so well pleased. Lucas do...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
