Hey guys, I'm having an issue on the gas flow from the petcock to the carburetor. When the gas line is connected to only the gastank, it runs freely. But when...
Floats could be stuck closed,tap it lightly with a light hammer.Or the breather hole is plugged in the carb. ... From: marcazoid <marcazoid@...> Subject:...
Choosing tires for a cycle is more confusing than car tires as you have more ratings,tread wear,traction,etc.And I won't go with a cheap tire either...
Tapped the floats with a hammer but with no luck, do you know where the breather hole is located on the carb? I've looked through the manual and couldn't find...
Take the bowls off and spray carb and choke cleaner up in there and see if it get any junk outta there Sent from my BlackBerry Smartphone provided by Alltel ...
Couldn't tell ya @ the moment but you could also try and blow air thru the line(mouth pressure)Obviously on the top of the carb or where the air box...
this is what i did. Loosen the drain screws at the bottom of the carbs then disconnect the gas line from the carbs and shoot carbn cleaner down inside there....
Hey group i hope all is well.......  Timm  Call me bro.......  313-525-0994 Triple Tyme Ent. c/o Ross "KAHUNA" Howard Kahuna djbigkhanua Howard (FB) ...
I'm not real familiar with the Carb on this bike, but have been in many others. Just a few obvious things. 1. Does the bike run? 2. Is there an inline filter? ...
I was able to get the gas flow to the carb again. I blew into the gasline directly into the carb. Looked like the floats were shut closed and the air pressure...
I live in Florida, although the bike is from Minnesota. My bike does not start without the choke. I think it's just the nature of these bikes. After a few...
Mine would never start without the choke out-after I get going I ease it back and shut it. I agree, I think it is just the nature of the beast. From:...
Sharyn Kepner
skep1@...
Nov 3, 2009 5:40 am
7436
It is the nature of the beast. There are some days I can get my 78 CB400A started and running without the choke, but it is only on warm days after it has been...
Hi Everyone, The CB400A project bike my boys have been working on all summer was giving us starting problems and it seem we created a new problem by using the...
It is not a big job to replace the starter motor just make sure u disconnect the positave battery cable or make sure the cable at the starter is cover well so...
If it is cold, I have to choke my cm400a for about 4 or 5 min. till she is warmed up. If it is already warm, I just twist the throttle once then start it up....
Ya ..she kick starts just fine, occasionally I get a strong kick back, and no grinding sounds with the kick start Just with the electric start, I just wonder...
I have many parts for a 1981 Honda cm400 custom. I have: front fender, rear turn signals (pair), rear brake light/tail light mount, center stand, air box...
Sweet bike! Thanks for sharing From: Hondamatic_400@yahoogroups.com [mailto:Hondamatic_400@yahoogroups.com] On Behalf Of Norm Sent: Friday, November 06, 2009...
I can't believe the price it's up to also! And that guy only gave it an 8!!!!! I love the little sticker on the tank! Remember Preserve Nature Always wear a...
Elizabeth, List is attached. Be patient downloading it - it's a rather large file. As I said, you can search the entire document for text in Adobe Reader. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
