Harley-Davidson_Swap_Meet : Messages : 974-1003 of 1003

I am looking for a clasic Harley to restore. I would prefer one that is
complete but is not nesisary. Something built between 1940 and 1950.  A knuckel
head would be great.

Let me know

Bill

#1002

From: "potmetal69" <riche39@...>
Date: Sun Sep 6, 2009 3:03 am
Subject: Clutch

potmetal69

Online Now

Every thing is adjusted but Clutch does not fully release.Hang in neutral drop
in first and can fell some pull.I'm gunna adjust again tomorrow,but any
thoughts?

#1001

From: Rick Woods <dink1970@...>
Date: Thu Sep 3, 2009 9:11 pm
Subject: RE: Engine light

mcstanger

Offline

Brad,



I use to think so also.

But, I checked mine last week, with no light on, and found a code.



Rick Woods

"There's something going on here that I really don't understand, but I like it."





To: Harley-Davidson_Swap_Meet@yahoogroups.com
From: ocalalabs@...
Date: Thu, 3 Sep 2009 14:51:03 +0000
Subject: RE: [Harley-Davidson_Swap_Meet] Engine light





Hi, Thanks for the suggestion. This is an intermittent problem though. If the
problem left a code or codes in the computer, the light should remain on until
the code is cleared. That is the unusual part of the problem. Thanks.
----- Original Message -----
From: Rick Woods
To: harley-davidson swap meet
Sent: Wed, 2 Sep 2009 09:20:57 +0000 (UTC)
Subject: RE: [Harley-Davidson_Swap_Meet] Engine light

Brad,

http://www.hdtalking.com/diagnostics_and_fuel_injection_related/2362-09_08_07_dt\
c_codes.html

Here is a link to a forum explaining how to check codes and the code
translation.

Rick Woods

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]










[Non-text portions of this message have been removed]

#1000

From: ocalalabs@...
Date: Thu Sep 3, 2009 2:52 pm
Subject: Re: Re: Engine light

ocalalabs

Offline

Thanks, hopefully it will help.
----- Original Message -----
From: jeffgeisse
To: Harley-Davidson Swap Meet
Sent: Wed, 2 Sep 2009 01:06:44 +0000 (UTC)
Subject: [Harley-Davidson_Swap_Meet] Re: Engine light





















Brad, I don't have an answer for you, but if you can't find any help here, try
joining another yahoo group called harleytech. Walt may be able to help you.

Good luck!

Jeff



--- In Harley-Davidson_Swap_Meet@yahoogroups.com, "ocalalabs"  wrote:

>

>    If anyone has any ideas, they would be appreciated. I have an 04 fuel
injected Road King. Today while riding the engine light came on as I was
accelerating. When I reached speed and was no longer under acceleration it went
off. I tried this a few times and it always came on and went off the same way
with one exception. Above 60 to 65 it remains on until  the spped drops below
60.  I have owned this bike since new, serviced regularly. I would take it to
the dealer, but where I live now, the local dealers service dept could not fing
the gas cap with a map and a GPS. So I am hoping for some ideas before I tow it
100 miles to another dealer.

>   Thanks

>   Brad

>




























[Non-text portions of this message have been removed]

#999

From: ocalalabs@...
Date: Thu Sep 3, 2009 2:51 pm
Subject: RE: Engine light

ocalalabs

Offline

Hi,  Thanks for the suggestion. This is an intermittent problem though. If the
problem left a code or codes in the computer, the light should remain on until
the code is cleared. That is the unusual part of the problem.  Thanks.
----- Original Message -----
From: Rick Woods
To: harley-davidson swap meet
Sent: Wed, 2 Sep 2009 09:20:57 +0000 (UTC)
Subject: RE: [Harley-Davidson_Swap_Meet] Engine light





















Brad,



http://www.hdtalking.com/diagnostics_and_fuel_injection_related/2362-09_08_07_dt\
c_codes.html



Here is a link to a forum explaining how to check codes and the code
translation.



Rick Woods



[Non-text portions of this message have been removed]



























[Non-text portions of this message have been removed]

#998

From: "jeffgeisse" <boogersdad@...>
Date: Wed Sep 2, 2009 1:06 am
Subject: Re: Engine light

jeffgeisse

Offline

Brad, I don't have an answer for you, but if you can't find any help here, try
joining another yahoo group called harleytech. Walt may be able to help you.
Good luck!
Jeff











--- In Harley-Davidson_Swap_Meet@yahoogroups.com, "ocalalabs" <ocalalabs@...>
wrote:
>
>    If anyone has any ideas, they would be appreciated. I have an 04 fuel
injected Road King. Today while riding the engine light came on as I was
accelerating. When I reached speed and was no longer under acceleration it went
off. I tried this a few times and it always came on and went off the same way
with one exception. Above 60 to 65 it remains on until  the spped drops below
60.  I have owned this bike since new, serviced regularly. I would take it to
the dealer, but where I live now, the local dealers service dept could not fing
the gas cap with a map and a GPS. So I am hoping for some ideas before I tow it
100 miles to another dealer.
>   Thanks
>   Brad
>

#997

From: Rick Woods <dink1970@...>
Date: Wed Sep 2, 2009 9:20 am
Subject: RE: Engine light

mcstanger

Offline

Brad,



http://www.hdtalking.com/diagnostics_and_fuel_injection_related/2362-09_08_07_dt\
c_codes.html



Here is a link to a forum explaining how to check codes and the code
translation.



Rick Woods









[Non-text portions of this message have been removed]

#996

From: "tim17090" <fx81b@...>
Date: Wed Sep 2, 2009 3:19 pm
Subject: 1976 FLH

tim17090

Offline

Lookin to sell my ride to buy a new Road King. Flh has a Springer Front
End,Crane Single Fire Ignition,S&S Carb,new wires and hoses Looks and runs
great.askin 8500 neg. N/E Pennsyvania (Pocono Mountains)

#995

From: "ocalalabs" <ocalalabs@...>
Date: Wed Sep 2, 2009 12:45 am
Subject: Engine light

ocalalabs

Offline

If anyone has any ideas, they would be appreciated. I have an 04 fuel
injected Road King. Today while riding the engine light came on as I was
accelerating. When I reached speed and was no longer under acceleration it went
off. I tried this a few times and it always came on and went off the same way
with one exception. Above 60 to 65 it remains on until  the spped drops below
60.  I have owned this bike since new, serviced regularly. I would take it to
the dealer, but where I live now, the local dealers service dept could not fing
the gas cap with a map and a GPS. So I am hoping for some ideas before I tow it
100 miles to another dealer.
   Thanks
   Brad

#994

From: Sarah <westcoastshafts@...>
Date: Tue Sep 1, 2009 9:42 pm
Subject: Re: Re: 2004 Sportster Oil Change

poolroses2000

Offline

Had no problem with your comment.Rather nice to know there is a smart ass in the
crowd besides me. Have a great day
Sarah a.k.a. Red rockit

--- On Mon, 8/31/09, Rich E <riche39@...> wrote:


From: Rich E <riche39@...>
Subject: Re: [Harley-Davidson_Swap_Meet] Re: 2004 Sportster Oil Change
To: Harley-Davidson_Swap_Meet@yahoogroups.com
Date: Monday, August 31, 2009, 3:08 PM


�



Hi,Sorry if you didn't like my reply to the oil change question.Why all the talk
about shit and toilet paper?That was the last thing on my mind.

--- On Mon, 8/31/09, drgnrydr <rfreeman375@ rogers.com> wrote:

> From: drgnrydr <rfreeman375@ rogers.com>
> Subject: [Harley-Davidson_ Swap_Meet] Re: 2004 Sportster Oil Change
> To: Harley-Davidson_ Swap_Meet@ yahoogroups. com
> Date: Monday, August 31, 2009, 9:58 AM
> --- In Harley-Davidson_ Swap_Meet@ yahoogroups. com,
> Rich E <riche39@... > wrote:
> >
> > Jesus Christ.Just dump the the oil out,and renew.I
> will hold your hand if that what it takes.
>
>
> Just wanted to thank Rich for replying. The last time I
> heard this it was muffled by the toilet paper and I didnt
> hear it all.
> Thanks again Rich, I am sure all our gardens will grow so
> much greener with your contribution.
>
>
>
> ------------ --------- --------- ------
>
> Yahoo! Groups Links
>
>
> � � mailto:Harley-Davidson_ Swap_Meet- fullfeatured@ yahoogroups. com
>
>
>
















[Non-text portions of this message have been removed]

#993

From: Rich E <riche39@...>
Date: Mon Aug 31, 2009 10:08 pm
Subject: Re: Re: 2004 Sportster Oil Change

potmetal69

Online Now

Jesus Christ.Just dump the the oil out,and renew.I will hold your hand if that
what it takes.

--- On Sat, 8/29/09, poolroses2000 <westcoastshafts@...> wrote:

> From: poolroses2000 <westcoastshafts@...>
> Subject: [Harley-Davidson_Swap_Meet] Re: 2004 Sportster Oil Change
> To: Harley-Davidson_Swap_Meet@yahoogroups.com
> Date: Saturday, August 29, 2009, 5:21 PM
> --- In Harley-Davidson_Swap_Meet@yahoogroups.com,
> "nathanb6615" <nathanb6615@...> wrote:
> >
> > Hey Group, I have a 1992 Sportster and a 2004. I have
> a service manual for the 92 but none for the 04. I need to
> change the oil in the 04 and my question is, "How do you get
> all the oil out of the oil tank"? Can't see an oil hose like
> on the 92.� Thanks in advance, Nate
> >
> You might already know about this but if not . Go to a boat
> supply or auto parts store there they should have a ELECTRIC
> OIL CHANGER primarily used to change oil in boats. what it
> is� is a electric pump with a long flexible tube that
> is small enough to get to the bottom of the oil pan. hope
> this helps. Sarah
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
> � � mailto:Harley-Davidson_Swap_Meet-fullfeatured@yahoogroups.com
>
>
>

#987

From: "poolroses2000" <westcoastshafts@...>
Date: Sat Aug 29, 2009 9:21 pm
Subject: Re: 2004 Sportster Oil Change

poolroses2000

Offline

--- In Harley-Davidson_Swap_Meet@yahoogroups.com, "nathanb6615"
<nathanb6615@...> wrote:
>
> Hey Group, I have a 1992 Sportster and a 2004. I have a service manual for the
92 but none for the 04. I need to change the oil in the 04 and my question is,
"How do you get all the oil out of the oil tank"? Can't see an oil hose like on
the 92.  Thanks in advance, Nate
>
You might already know about this but if not . Go to a boat supply or auto parts
store there they should have a ELECTRIC OIL CHANGER primarily used to change oil
in boats. what it is  is a electric pump with a long flexible tube that is small
enough to get to the bottom of the oil pan. hope this helps. Sarah

#986

From: "poolroses2000" <westcoastshafts@...>
Date: Sat Aug 29, 2009 9:24 pm
Subject: parts 88 twin cam

poolroses2000

Offline

I have two stock heads almost new and two stock mufflers for twin cam engine
etc.. looking to sell. please contact with offer. Sarah

#985

From: "lorilli1958" <lorilli1958@...>
Date: Thu Aug 27, 2009 6:58 am
Subject: 1980 H-D collectables

lorilli1958

Offline

We had purchased a H-D Hog cookie jar in 1984, limited edition and was wondering
what the value might be today. Also a stuffed Eaglet wearing the H-D vest (
Cute! ) Anyone with interest or an idea of what the values are, please let me
know.
thanks and, to the wind!

#984

From: "nathanb6615" <nathanb6615@...>
Date: Sat Aug 29, 2009 5:18 pm
Subject: 2004 Sportster Oil Change

nathanb6615

Offline

Hey Group, I have a 1992 Sportster and a 2004. I have a service manual for the
92 but none for the 04. I need to change the oil in the 04 and my question is,
"How do you get all the oil out of the oil tank"? Can't see an oil hose like on
the 92.  Thanks in advance, Nate

#983

From: "drcclc2" <drcclc@...>
Date: Mon Aug 24, 2009 4:11 pm
Subject: wtb flh parts

drcclc2

Offline

in need of 1980 flh foward controls and lower tree have wide glide controls and
tree to trade or will buy out right .
Thanks Donnie

#982

From: Ken Good <kgood_kgood@...>
Date: Tue Jul 28, 2009 1:34 am
Subject: New to Group

kgood_kgood

Offline

I am new to your group.� I recently purchased my first Harley.� I have ridden
for years but not on a Harley.� My wife rides with me and we have been trying to
find a good quality intercom system.� If anyone has any suggestions or
recommendations, please reply to me.� Thanks, Ken




[Non-text portions of this message have been removed]

#981

From: "jason_boss2000" <jason_boss2000@...>
Date: Fri May 15, 2009 1:44 pm
Subject: harley davidson softail standard 2002

jason_boss2000

Offline

I have a 2002 softail that is decked out with only 6000 miles on it,this bike
is for sale it is jet black with red painted pin striping.
   memphis windsheild
   two seats
   saddle bags
   about two grand in extra chrome
   drag bars (wireless)
   vance and hines pipes
   bullet style headlamp
   led turn signals front and rear
   it is fuel injected and it is a 5 speed
   I am asking $13500.00 it is in showroom nice condition
  my name is Jason you can reach me at 918-752-9052
  i can email pics to you upon request. thanks

#980

From: "tonianne" <tonianne@...>
Date: Fri May 8, 2009 3:57 pm
Subject: FOR SALE: Harley Davidson bar & shield Logo Flags also Lanyard / key Rings

toniannejimmy

Offline

hi all, i live in fort ann, NY (near lake george)
I Own a 2003 100th anniversary sportster. It took me FOREVER to find a flag for
my flagpole. If it was that hard for me, i know its really hard to find. They
don't sell them at the Harley shops anymore............ so here goes....

HARLEY DAVIDSON BAR & SHIELD LOGO FLAG  #32 shipped

3 FOOT X 5 FOOT

100% Polyester flag light weight, suitable for indoor or outdoor use.

There are two brass gromments to hang the flag easily on a flag pole

A MUST FOR ANY harley OWNER.

CHECK OUT PHOTO ~ I TOOK ONE OUT OF THE BAG TO PHOTO

email: tonianne@...
Accepted forms of payment: PayPal
Shipping Fee: free to USA ONLY
Shipping Paid By: Buyer
Will Ship To: US Only


also:

harley davidson bar & shield logo lanyard key ring id holder
New
  $13.50 shipped  or   2 /$22.00
23 1/2 inches. clips onto anything.
Great to show off you are a Harely Lover.
Great for your keys, id etc. Quick release too.





CHECK OUT PHOTO in photo section  under toniannejimmy

#979

From: "Tom & Sher Widger" <tomdubya@...>
Date: Mon Apr 27, 2009 1:36 am
Subject: Crane 290-2 for sale

tomdubya

Offline

Crane 290-2
chain drive
for 06 dyna and 07 and up TC
$160.00 includes shipping cont. US

Tomdubya@...

#978

From: "Tom & Sher Widger" <tomdubya@...>
Date: Mon Apr 27, 2009 1:39 am
Subject: Fueling 7060 high volume oil pump

tomdubya

Offline

Fueling 7060 high volume oil pump
fits 06 dyna and 07 and up TC
$250 includes shipping
cont. USA

Tomdubya@...

#977

From: Richard Spicak <rjstsn@...>
Date: Sat Apr 25, 2009 3:57 pm
Subject: Re: Headlight extension

snakemanrick

Offline

Put some black tape near the light at the windsheld to stop the reflection.

--- On Sat, 4/25/09, roadtramp79 <roadtramp79@...> wrote:

From: roadtramp79 <roadtramp79@...>
Subject: [Harley-Davidson_Swap_Meet] Headlight extension
To: Harley-Davidson_Swap_Meet@yahoogroups.com
Date: Saturday, April 25, 2009, 6:24 AM









We have a 08 FXD w/ a clamp on windshields which work great
Problem is it set just a inch or so in front of the headlight at night I get a
little reflection off the shield
As anyone moved the headlight forward w/ a extension if so where did you get it
from, and how did it work
Thank in advance
















[Non-text portions of this message have been removed]

Reply | Forward | Messages in this Topic (3)

#976

From: "mjharleyman" <mjharleyman@...>
Date: Sun Apr 26, 2009 1:26 am
Subject: Re: Headlight extension

mjharleyman

Offline

--- In Harley-Davidson_Swap_Meet@yahoogroups.com, "roadtramp79"
<roadtramp79@...> wrote:
>
>
> We have a 08 FXD w/ a clamp on windshields which work great
> Problem is it set just a inch or so in front of the headlight at night I get a
little reflection  off the shield
> As anyone moved the headlight forward w/ a extension if so where did you get
it from, and how did it work
> Thank in advance
>
I had to put a new bezal with a built in visor on my dads and it solved the
problem but I dont know what you have. I can also build a polished mount if
needed

Reply | Forward | Messages in this Topic (3)

#975

From: "roadtramp79" <roadtramp79@...>
Date: Sat Apr 25, 2009 11:24 am
Subject: Headlight extension

roadtramp79

Offline

We have a 08 FXD w/ a clamp on windshields which work great
Problem is it set just a inch or so in front of the headlight at night I get a
little reflection  off the shield
As anyone moved the headlight forward w/ a extension if so where did you get it
from, and how did it work
Thank in advance

Reply | Forward | Messages in this Topic (3)

#974

From: Paul Rogers <rogerspaul@...>
Date: Thu Apr 2, 2009 6:34 pm
Subject: Looking for original breather screws for Twin-Cam

rogerspaulflht

Offline

I need 2 of the original breather screws for a twin-cam air cleaner setup.
The part number is 29465-99

The story is... I was originally running the 29440-99B SE air cleaner setup,
which does not use the original equipment breather screws... I am now
switching to the new model of the SE air cleaner setup, part number
29440-99D (because the 99B seems to have been discontinued)

Anybody that has made the switch to the SE 29440-99B would have the original
breather screws laying around and I could sure use them.

--
Paul Rogers
rogerspaul@...


[Non-text portions of this message have been removed]