Guys, Does anyone have any hints and tips on looking after the chasis. Mine would definitely benefit from some TLC as there are some definite signs of surface...
Personally I like the black waxoyle on the chassis. It goes over rust OK, and does not go white over time like the "clear" waxoyle does, but it does need re...
If you are using hammerite (Make that the glossy smooth paint- its called smoothrite) then its best to get any loose paint of and then use celulose thinners...
Had a quick search and see Rimmers suggest I use engine numbers to get the right part (Seal Kit) but further down it looks like the seal kits are the same for...
... I Found this link http://shop.dingocroft.co.uk/acatalog/Clutch_Hydraulics.html Could it be the Clutch Slave Cylinder for 109 V8 and Defender V8 Ref:...
... Rimmer dont list this however and say 3.9 litre Up to eng no. 38D07802A - (1) - TKC2786 Suggesting this before 1992 Eng no. 35D07803A onwards - (1) -...
... They are not RR items, just an off the shelf Lucas Girling ones. I have a spare set of rebuilt units if you want. I rebuilt all of mine, (brake and ...
... They are not RR items, just an off the shelf Lucas Girling ones. I have a spare set of rebuilt units if you want. I rebuilt all of mine, (brake and ...
Its part number FF001638 or TKC2786L and costs a whole £17.00 http://www.famousfour.co.uk/new_parts/parts-veh-rrc_86_95-sec-clgb.html It fitted straight in,...
... Thanks mark Rimmers also suggest a repair kit for £8 or TKC2786p for £10 so it seems to be the same design as the 3.5l cars after all up to 1992 which is...
If the piston is smaller then I presume the clutch pedal will be harder to press and the pushrod will move in further in one press. This worries me a bit as I...
Well it arrived today (a TKC2786) and its not the correct slave cylinder sadly. The connections are both the same size and imperial where as mine seem to be...
Mark, I can't access your most useful G33 site, www.g33.co.uk <http://www.g33.co.uk/> I'm told it's 'forbidden to use this server'. Any ideas? Regards. Glenn...
Thats because Ive run out of credit for having it proffesionally hosted- (notice no adverts) so they want another £15. Ill sort it out. Thanks Mark ... From:...
Mark, Need any contributions to all that? G ... From: GinettaG33@yahoogroups.com [mailto:GinettaG33@yahoogroups.com] On Behalf Of Mark Thompson Sent: 28 June...
Can anyone advise me on the merits of AVO dampers as against Spax? My rear Spaxes are leaking so I'll have to get them replaced. However, their website has...
Glenn If you are going for the cheapest AVOs + Spax dampers, my experience is that AVO have the edge. I've had a few Spax shocks leak and had to buy new....
Graham, Thanks for your help. I looked at the Nitron website and they quote their dampers at £345 a pop. More than I can justify, I’m afraid. So Avo it is...
Glenn Attached is a picture of the front and rear AVO dampers. I also have a pair of up-rated (600lb) 9" springs in black for the front if you are interested. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
