Dont forget A G33 was being broken up in Scotland a few weeks back- The reg is J921ERA,no idea of mileage,3.9 engine/gear box(but that will probably be,NOT...
Thanks Mark I have emailed Bill, and spoken to Spadge. It looks like Bill is my best bet hor the alloy hubs, wishbone and wheel. I am gutted, I wasnt even...
Glen Thanks. I am pretty worried if I cant get the suspension components that the Insurers will write it off Nick ... From: glenn <glenn.hyde@...> ...
Nick Sorry to hear your news. The alloy uprights can be successfully welded so don't worry too much yet. Paul Edwards had this done and the welded upright is...
I wish it was that simple, the allow broke into several pieces and one of the bits is missing. I seached the accident area and couldnt find it. Nick ... ...
As a matter of interest I could be interested in some of the wheels as I was about to have mine refirbished (2 are lightly scuffed) , but some second hand ones...
Ok I was going to offer to take all 4 from him I could then sell on to you at the price i paid if that makes it simpler. Nick ... From: Mark Thompson...
... is getting tatty. I cant tell if they are buckled at all though. I curbed two of mine, and as they are a diamond cut finish, they need to be reskimmed to...
Hi Mark I have bought one whell from Bill, I expect I will have it refurbed. I havent seen a picture but I am working onthe basis that it cant be any...
Ive just bought the two remaining wheels. The first quote Ive had for a full referb inc diamond cut is £100 per wheel! I have enought wheels now I dont mind...
you can get the uprights from CAR BUILDER SOLUTIONS; but they are really not cheap.......... ... From: Nick Towe To: GinettaG33@yahoogroups.com Sent:...
Just as a matter of interest, the Fondametal wheels are powder coated so you cant remove the coating chemically. Mine have crazed slightly (apart from the...
I've now completed the front & rear roll centres mod - at front, 3mm of spacers added under top outer wishbone rod-ends, at rear, 3mm trimmed from spacers...
The roll centers move up and down as the wishbones move, but the mod you have done makes the front and rear roll centers nearer to each other along the center...
Thanks Mark. I'm still not sure what difference, if any, the front and rear ride heights make to the roll centres. G ... From: GinettaG33@yahoogroups.com...
Glenn I can probably add to Mark's explanation but not right now - I'm at a Green Day gig! You have done the right thing. I'll write something next week to...
The basic idea is to get the roll centers at the same hight and to move up and down at the same rate as the car leans when cornering, so you have a uniform...
THATS THE FUNNIEST THING I HAVE READ ON THIS GROUP Mark, do you have music in the G33 ( I know you cant hear anyhing above 40mph ! ) Perry ... From: Graham...
Pardon ..... ... From: GinettaG33@yahoogroups.com <GinettaG33@yahoogroups.com> To: GinettaG33@yahoogroups.com <GinettaG33@yahoogroups.com> Sent: Sun Nov 01...
Funny storey there- A friend of mine used to be one of the big nobs for Sony car HI FI, and they borrowed the G33 for a an Earls court show (This way they...
I am not sure my accident was caused by rollcentre issues, I was under acceleration not braking. But I will have the mod done anyway if and when the insurers...
Good news first - The Insurers have approved the repairs to my car! Now to bushes. I intend to have the bushes changed whilst the suspension is being...
I think from memory they are some think like triumph GT6, TR6 or spitfire bushes, but Id drop one out , measure them and call Rimmer brothers, who will...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
