I have a 2-piece body and was wondering what the difference was between the Avenger 2-piece and the Valkyrie 2-piece. How do I identify which one I have? Does...
Ok... Started thinking about putting the body together and I need some advise from Body-men or Engineer-types. Starting with the front. It was cut with a...
About the floor... The Avenger GT-12 did not have a floor and it did have a firewall and a small rear floor that was contoured to mate to the VW pan. The...
The major difference in the Avenger 2 piece and the Valkyrie 2 piece is wheelbase and body length. The Valkyrie has a longer wheelbase and a shorter overall...
I would just use resin and cloth it will work fine as long as you prep the surfaces buy grinding and beveling the edges about 2" on each side of the seam. They...
I am not the all-knowing guru on this subject, but I have put together a couple cut up Avengers and done some fiberglass patching from time to time. My ...
Perhaps someone mentioned it and I missed it, but you dont "butt" the pieces up tight to end other as the saw took out a small portion so you have to leave a...
Does anyone have a photo of an early 2-piece Avenger GT12 with the rear section flipped up? My car has been cut into so many pieces (see the photo section of...
I am pretty sure it is an early 2-piece GT12 based on what everyone is saying. It has the thick rockers under the doors and they extend out the back and the...
I just happened to be painting the underside of my gt, it's the three piece one though, and took pics and posted in my section hope they may help. Just a...
In a message dated 4/1/2008 7:55:23 P.M. Mountain Daylight Time, rfrancis@... writes: Does anyone have a photo of an early 2-piece Avenger GT12 with...
Is anybody working on a Avenger/Fiero? Like to see some photos and get an idea how much stretching/shrinking of the body or frame you had to do. I built a...
Thanks Bud... Found it. It looks like there should be some kind of firewall right behind the seats with a window very similar to the Valkyrie. I don't think I...
In a message dated 4/2/2008 9:35:53 A.M. Mountain Daylight Time, rfrancis@... writes: Thanks Bud... Found it. It looks like there should be some kind...
Page 12 of the early manual shows a shot of the bulkhead of a 2-piece. I don't think mine has that unless it is in 4 pieces and I just can't recognize it....
Hey, how about on a Banshee/Caribee? Where would the data plate be located on that one. I've looked it over but not awfully close....but haven't found it...
Has anyone had to remove or re-route an oil cooler? We are trying to install the rear fiberglass that goes in fron of the engine. It is hitting the oil cooler....
Do you mean stock dog house oil cooler or some remote aftermarket thing? I cant imagine any VW based kit that was not built to have room for the dog house...
My Divorce is going bad, need to get lawyer money. I have a set of Flat Bar bumpers for a Mercedes Gazelle kit car I have been holding on to, but I need money...
Hey All, I have an SSK Gazelle and I need to get it painted. I was toying with the idea of doing it myself. Has anyone done this? Any help would be great. ...
David, I have not painted mine but am going to. I have access to a booth and am going to paint the body a light tan to a cream color and the fenders brown. I...
David- I painted my Gazelle while I was building it a couple years ago. I have a friend who owns NAPA stores and I got all my supplies there. I used a color...
I used to paint sports cars with Acrylic Lacquer. It dried fast and you could paint In garage and get a great job. You can't even buy acrylic lacquer top...
Most VW owners have tackled this rotten little task, I did it on my VW trike and now need to do it on my Laser, one side is too high, So Jumping past all the...
I just found, and also bought and used on my Avenger underbody and inside is Laquer Paint. It's $21.00 a quart. It's pre mixed . They have primer 5 or 6...
Did you still want to sell the gazelle carpet? Thanks, WalkerTBI VW801-654-1047 _________________________________________________________________ Get in touch...
