Hi Allen, Thanks for the advice. Seems to parallel everything I have received so far. What year 2.8 would you suggest, I dont want the smog or electronic ...
some places will title it as a 1929 gazelle. you have to check around and get it done that way. mine has no smog anything on it and it titled as a 1980...
The Pinto rear will handle the engine with no problem. The Chevette I wouldn't be so confident in. ... From: wspohn4@... To: Fiberfab_CMC@yahoogroups.com ...
... electronic ... existing ... torque ... want simple, ... and use ... Bill, Which V6 engine/automatic transmission would you suggest for the Chevette-based...
In a message dated 04/02/2007 12:47:28 P.M. Pacific Standard Time, phc@... writes: Which V6 engine/automatic transmission would you suggest for the ...
My Gazelle has the old carburated Ford 2.8 V6 with the C-3 automatic. It fits nicely and is a good combination of adequate power and simplicity. It does have...
There is another one on eBay _http://cgi.ebay.com/AVENGER-GT-12-Model-by-IMC-1-25-Sc_W0QQitemZ190080754056Q QihZ009QQcategoryZ2581QQrdZ1QQcmdZViewItem_ ...
Recently acquired (free) an unassembled mgtd kit from a friend. The trick is the kit must shipped across the country. Can anyone help me out on the weight of a...
Be sure to look at rear wheel drive cars and small trucks. Like I saw earlier any of the V6s would be ok. I think all of them except the 4.3 chevy are a 60...
Hi, My car is the pinto base SSK, and the only problem with all this great advice is that you can't find any of these engines around. Everywhere I turn...
Look at pick-up trucks. Chances are you are going to have to go to a wrecker and buy a used engine and have it rebuilt. You can fit any rear wheel drive V6,...
Guys, You need to watch what you do with the Chevette version. The Ford Pinto rear end is much more substantial than the Chevette and doesn't have the torque...
The old 2.3 was in a wide variety of Fords & Mercurys and even the later model Ford Ranger trucks had a variation of it. I don't have any problems finding...
You are right, Derald, they are all over the place. There are also hi performance parts availble for the engine ... From: "Derald Watts" <dwhof@...> To:...
The better question to ask is, "How much will it cost?" to truck it over to you. Shipping charges according to weight are for small boxes for UPS and FedEx...
With or without a frame 1300 lbs without about 1800-1900 with ... From: Chris "Edwards" Aguilera To: Fiberfab_CMC@yahoogroups.com Sent: 02/15/2007 1:43 AM ...
http://cgi.ebay.com/ebaymotors/60s-Banshee-Healey-Ford-v8-Daytona-Coupe- replica_W0QQitemZ150091581821QQihZ005QQcategoryZ7251QQrdZ1QQcmdZViewItem Now if I had...
hi all my name is andrew, i am from denmark i have a aztec gt on a vw pan, that i am restoring, I have too do some glasfiber repars, so i need too now if fiber...
Andrew, I have found that epoxy resins will bond better to polyester resins as the polyester ages. I have the MG TD from Fiberfab, mine is polyester, so I...
The answer is yes. After this period of time make sure you thoroughly grind the surface if applying any new resin or material otherwise you will have a problem...
The best book I have found for fiberglass work is "Fiberglass & Composite Materials" by Forbes Aird. ISBN 1-55788-239-8 published by HP books and it was ...
Howdy all, Well, I couldn't wait until I found a decent FF. I decided to trade my 65 Dart for a Bradley GT1. It is a nice looking one on the exterior and the...
I have a 1965 chassis fully restored and weaherized. I purcase a Fiberfab Vagabond and am curious how do I put my 1965 gas tank in this body? It doesn't open...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
