Trying to figure out if I need to flatbed a 81 wagoneer for towing. Transfer case is part-time, so that's NP208, right? Is towing on rear wheels with transfer...
I thought some machining was necessary as the gm isn't just a drop in to the amc. Dropping in the mallory amc version is pretty easy but its a tight fit to get...
get one from Zack at ZMjeeps.com. simple swap, and you can either use your old dizzy gear, or put in a whole new set. but don't just change the dizzy gear...
I would take out the driveshaft, but I'm not sure if it's necessary. Depends on the towing distance, I'd tow it slowly if it's just a few miles or so, maybe...
hey guys and gals...I just had my distributor swapped out by Performance Distributors...and it was geared JUST AS I ORDERED.....a '77 Chevy HEI with a gear...
Why change to a weaker axle. Keep the D44. Jim Sterlig ... From: FSJ-List@yahoogroups.com [mailto:FSJ-List@yahoogroups.com] On Behalf Of kdavison14 Sent:...
I second that -- I looked at changing axles too, but the jeep d44 is solid--I would take it over a 10 bolt anyday. I am wondering if the Chevy axles have...
I second that -- I looked at changing axles too, but the jeep d44 is solid--I would take it over a 10 bolt anyday. I am wondering if the Chevy axles have...
This isn't mine, but looks sweet! Someone has to have a V6 CJ5 out there for this. http://reno.craigslist.org/pts/1101138406.html Sincerely, Greg Taylor...
It is absoutely OK to tow, either 4 wheels on the ground or on a dolly if the Transfer case has a "Neutral" option. I have flat towed FSJ's 100's of miles...
I am trying to separate the t-case from the transmission that came out when I put in the manual. They are on a dolly on the floor and I have the front and...
Be safe and remove the rear driveline. Paul Stuevens ... From: Carl Hirsch <carl.hirsch@...> Subject: [FSJ-List] Towing a part-time wagoneer on rear...
There was some discussion on the AMC-list lately about using the Motorcraft dist and GM HEI module with external HEI coil. Towing Part time and HEI Dist's ...
This is a pretty easy swap if you get a modified-for-AMC unit off of evil-bay. My FSJ started right up after the swap. I have since swapped out the P/S belt...
I have found a pretty cheap 1989 Chevrolet School Bus. Probably a 50+ passenger. I was told it has a Cat Engine and Allison Trans. All I can find on the...
Good morning group Well I finally got my eng out (360), and down to the machine shop. Now the bad news all is lost, cam, crank will have to be reground, cam...
Hi Brian, Sorry to hear of your total loss on the engine. :( No aftermarket rotating assemblies that I know of ... perhaps over on Ebay. You're looking at...
Hello Greg... What is Rcik asking for the rebuilt 360 if I may ask? frank ... From: Greg Taylor To: FSJ-List@yahoogroups.com Sent: Saturday, April 04, 2009...
Hi Frank, Here's an email I got from Rick, with details on everything he did to the engine and selling pice. Pics are on the forum link I included below. ...
Thank you Greg...That is info I needed...Have good day frank ... From: Greg Taylor To: FSJ-List@yahoogroups.com Sent: Saturday, April 04, 2009 1:21 PM Subject:...
You're most welcome, Frank. Sincerely, Greg Taylor :) <>< Rochester Hills, MI 1989 Jeep Grand Wagoneer "TRMN8R2" 330-CID AMC Stroker V8 And the testimony is...
Previous owner tried welding on original jeep axle and ruined it. Chevy 10 bolt is basically free and I get both front and rear axles. I am going to try it for...
The engine is a 8.2l Detroit Diesel "Fuel Pincher". A google search for a DD Fuel Pincher will pull up their specs. The GM/Chevy bus chassis have Detroits and...
Peter Lewis
emeraldlawnmowing@...
Apr 5, 2009 3:05 am
95357
... From: Brian Diehm <bdiehm@...> Subject: [FSJ-List] eng problem To: FSJ-List@yahoogroups.com Received: Saturday, April 4, 2009, 1:37 PM Good morning...
The eng was rebuilt by Perry tech about 5k miles ago balanced, line bored, decked, forged TRW pistons, bored 30 over, isky cam and kit, Crain roller rockers,...
Hi All, Nice to be amoung some FSJ fans. I own a 1989 Grand Wagoneer, stock and in pretty good shape, and a 1975 J20 which I bought new (now that dates me). I...
i have a 1986 grand that i'm trying to restore. where do i find the parts for that i need a head liner and all the other odds and ends. any help will....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
