Choke Stove. It CAN be left off, the choke will take longer to open... ... From: "bonweis" <paladin@...> To: <FSJ-List@yahoogroups.com> Sent: Monday,...
Long skinny screwdriver between the grill and the hood, right about where the hood bump starts. Hopefully you don't have the optional plate that prevents...
A: I use Autolite plugs in my J4000 with the Mopar electronic ignition coil and points and get zero ping on lower octane stuff too (my motor came from a '77...
A: I don't know if it will work with the later ones, but I have a universal Borg Warner EGR1222 (Nascar series) but it's not going to work on my stroker motor...
A: Heat Riser tube. I don't have the part number handy, but it's available in the "HELP!" rack at most parts stores. I have one someplace, but I'm reorganizing...
A: I can shoot a pic of it on mine. Just about a foot to the left (driver's side) of center From: "Don Hansen" <fixxa@...> Subject: Re: SC J-10, hoodlatch...
Hi, Gentlemen (and Frank and Russ, too) I wanted to post and let you know I went to Pittsburgh and got another '80 J10 sportside. This one is to combine with...
I was planning on updating my ignition system for the propane engine, and from what you're saying I'll need to do it. I'd also like to run an open loop ECM...
Jim, he meant the choke stove. Heat riser's the tube from the manifold to the horn of the air filter, yes?? -Don ... From: "Jim Blair" <carnuck1@...> To:...
And you expected a rust free vehicle from up North? Don't forget to look for solid steel brushguard(s) for front, rear and both sides. LOL frank n texas ... ...
Well Frank, I was going on what the PO was telling me to my specific questions. I guess he knew if I drove 500 miles I wouldn't go home without it. The front...
Sounds like the Jeep God was driving with you pulling it home with a fiberglass bumper..When did you realize it was fiberglass? Glad ya made it safely..Sounds...
Yes it is what the others have said, a choke stove heat tube. There are two from the intake manifold going to the carb. NOTE: These tubes "should" pull out of...
Yeah, its screwed to the pass. side with a (IIRC) 9/16" size comp. nut. The other side goed to the spout on the back of the carb that angles down over the...
David... Before you take to the screwdriver and the BFH a little trick that works on my J-10 is to have one person inside pulling on the hood release while a ...
Nah, the heat riser's the little flippy thing that goes between the ex. manifold and the exhaust pipe on the passenger side. It's always rusted open when you...
Hi All, I'm planning on my first 4wd day trip later in the month and wanted a bit of advice on the recovery gear that might be suitable for an FSJ. The...
... Well, the hooks will probably yank off the stock bumper. Attach them to the frame. You may have to drill a hole for bolts. Use strong bolts, and find a ...
Frank, I discovered it when we took the bumper off at the shop the day after we got it there. We had discussed the delaminated look of the bottom of the bumper...
Good luck with your new baby...Work safely and keep us all posted.. Are ya going to take and post progress pics like before and after resto? frank n texas ... ...
Hi everyone, I'm about to put in a "new" gas tank coffin in my GW. I was wondering if I should drill more drain holes, or make the existing ones bigger to...
I think the main problem is that the dirt that gets caught inside the coffin, due to the basic design and the rubber cover, holds the moisture in there and...
Subject: Atlanta area crusher alert! Date: Wed, 2 Jun 2004 10:53:50 -0400 Hi all There are a bunch of Atlanta area AMCers that are familiar with Mr King's ...
Dave, You've got a good point there with the dirt. There was enough to fill a 2 gallon bucket. I sanded it down, painted it with a rattle-can primer called...
A: Mine will be running the CDI ignition system off an XJ. http://www.biphase.com (or is it http://www.bi-phase.com ?) Superior propane has most of the stuff I...
A: I meant the heat riser tube for the choke. (different parts but similar nomenclature!) From: "Don Hansen" <fixxa@...> Subject: Re: Re: what's that...
A: I have my choke completely off my carb right now (need to change my rad before I can do much else, since the %$#@^&* fan blade suddenly bent and ate my NEW...
