Andrew, My 87 rear window has the same mysterious thunk as it shuts! I have rebuilt the entire tailgate mechanism and have new window runners and seals. It...
Did you leave the screws/bolts for the tailgate window tracks slightly loose, close the tailgate firmly and then roll the glass up and down a few times to...
Seeing as how you have an 87, then the temp shouldn't be an issue. On the other hand, it might cause the paint to deteriorate (sp?). BJ's Offroad sells FSJ...
Calipers, rotor/bearing, tie rod end, steering knuckle (check ball joints, if iffy, you might as well do them too, you'll have the press anyway!) and spindle...
Jim...Does that plastic plumbing pipe meet your local codes? If not, it could keep you from selling the house quickly at some point in time? (If caught by a...
It would have to be galvanized on both the inside and the outside which is a bit pricy but is the way to only have to do it once and do it safely. Frank in...
Thanks for the info. Frank in Texas ... From: "Jim Blair" <carnuck1@...> To: "2" <fsj-list@yahoogroups.com> Sent: Monday, December 01, 2003 12:08 AM ...
Frank said ".Only prob with pipe is that it will rust internally" ... Hi Frank..I used the term "iron pipe"...This is available as " black pipe" which will...
Giles
ggilson@...
Dec 1, 2003 2:12 pm
58608
Frank, I have an additional tank in my system-an old approx. 40 gal acetylene tank. It had only one inlet in the end so I mounted it vertically upsidedown in...
Jim, The puller was for getting the spindle off of the knuckle-it was a real tight fit into the knuckle and took a lot of force to separate. I use my bench...
Morning Giles...I knew what you meant but thought others might not pick up on it.. Have a good week.. Frank in Texas ... From: "Giles" <ggilson@...> ...
Thanks Chuck... Frank in Texas ... From: "chuck paras" <pcparas@...> To: <FSJ-List@yahoogroups.com> Sent: Monday, December 01, 2003 8:23 AM Subject:...
Idiots!!!!! I don't remember now what the different ratings were for marksmanship with the M1 but I missed the top one by one shot. When they pulled my target...
The TG window on my wifes 87 used to do that. I fixed it by adjusting the latch on the TG. Possibly it just isn't closing right. Her cruise also did and still...
my 2 cents here <G> Once my factory installed insulation fell down and off on my 1982 J-10, it was not very long before the underside of the entire hood...
Rhino lining works wonders for insulation and rust prevention, but it does make it a little heavy. Jackie ... From: Frank Donnelly To: FSJ-List@yahoogroups.com...
Will the hood springs hold up the weight of the hood with that on it? Is that not affected by the engine heat? Bet it will help reduce hail dings on the top...
A while back, like maybe a year), someone suggested cutting the excees "toilet tank chain" that connects the cruise to the throttle as a "fix" for that. Tom...
I have only tried it on a CJ, but you can ask them to spray it with a thin coat. Jackie ... From: Frank Donnelly To: FSJ-List@yahoogroups.com Sent: Monday,...
A: It is the new code here. Otherwise, I would replace the now not wanted galvanized with copper (which costs 10 times as much) From: "Frank Donnelly"...
A: I hope you mean an old Oxy tank? The vapors would stay in an Acet tank and could lead to a boom? From: "chuck paras" <pcparas@...> Subject: Re: Air...
A: Had a similar situ. My buddy couldn't get a bullseye, no matter how hard he tried, and you couldn't get a weekend pass unless you had at least 1. We traded...
http://www.kirotv.com/news/2672653/detail.html Jim Blair, Seattle, WA '84 J10 Black Jack (getting lifted and stroked!), '73 J4000 304/TH400/QT tow truck (it's...
Anyone know where i can get a license plate light for '85 GW? I went to auto zone to get one and they said it was discontinued!! Kevin '85 GW [Non-text...
Hans, mine is now wood grain free, becouse the previous owner did not do much to keep the body clean and maintained, it was so sun dried and bad looking i took...
