Hi twice now i,ve lost all of my transmissions oil because a ruuber hose came off. At several locations there are short rubber sections connected with hose...
Simon, Mine did the same thing, and it was driven to the point were internal springs broke, and the frictions wore down to the metal. I'm told that the cooler...
Thanks it was really incredible i lost about 8 quarts in 2 seconds losing all traction in the process. It happened in the middle of a crowded street. To...
... Here are the issues I can see with a 79 CJ: The motor to tranny (727 from a 80+ wag) should be no problem with the 304 but the transfer case end is an...
Your J-20 should have 16" wheels. ... From: "emailsierra" <emailsierra@...> To: <FSJ-List@yahoogroups.com> Sent: Tuesday, April 30, 2002 7:41 PM Subject:...
Simon, Wow! 8 quarts in 2 seconds is _a_lot_. Loctite sells a mild threadlocker, along with other brands. It's a semi-thick liquid that's dripped onto...
Lindel: Thanks for the response..Would those be "OD" or "ID" sizes? John & I would appreciate having that info from ya..Have a good day.. Frank In Texas ... ...
Frank Donnelly
frankdo@...
May 1, 2002 11:14 am
25041
All list members: Would appreciate any and all suggestions as to preventative damage measures I might take before attempting to start up my J-10.. 360 since it...
Frank Donnelly
frankdo@...
May 1, 2002 11:43 am
25042
Michael's right. The distributors, while containing all indentical parts are not "setup" the same. The 304's distributor has centrifugal advance limited. If...
Take out the plugs and spray in a little motor oil. Or Mystery Marvel Oil (i've heard of people using PB Blaster, WD40, Liquid Wrench, etc...). Try to get...
Matt: Thanks so much for the suggestions..Shall do just that as the old girl does have 98,000 original miles on it. I know as I bought her new at a dealer in...
Frank Donnelly
frankdo@...
May 1, 2002 12:16 pm
25045
Actually they are 16.5" rims. Sort of an odd size. Ford also used these for a few years. I recently put tires on mine. I know that Goodyear and Cooper make ...
A: The lines made up for fuel (often in the brake parts section of stores) should work. From: "Frank Donnelly" <frankdo@...> Subject: Re: transmission...
A: Pop over to Schucks and check the HELP section (AKA Dorman) From: "gatesjg2000" <jgates@...> Subject: Steering overhaul I'm trying to get the slop out...
A: Your rear band isn't fully engaging. Drop the pan, and tighten it, then back off 2 1/2 turns and it should be okay. (another common 727 problem) Hopefully...
my name is jeremy and i wrote the other day about problems i have with my 84 grand wag with the 360 i have oil leaking from the top of the oil pan gasket even...
A: That would be Dorman. Hopefully you can find a store where the manager didn't throw out the old books (anything over 1 year old are gone from my old store,...
... Make sure it's not oil leaking down from a valve cover gasket before you do anything major but most likely it's the motors rear main seal. Look in the ...
Joe Schaefer
oldiron@...
May 1, 2002 2:41 pm
25053
Quick question...whats the easiest way to get rid of the rear glass before I cut the top off. I was considering just breaking it out for the heck of it. Just...
Guys, rubber hoses with clamps is not the factory setup. Many owners have replaced the original highpressure hoses because they are expensive and hard to find...
The GW is taking too much maintenance and too much gas to be an every day family vehicle. At least in my family. So it is for sale. I figured I would post it...
the rear glass?...as in side windows......I took 'em out......as in , cut to the edge and the separated the metal carefully to remove the glass, and rubber...
-=MuddyJEEP.com=-
MuddyJEEP@...
May 1, 2002 4:12 pm
25057
Hey guys, I know that Ouray is a huge get together for everyone but I just wanted to let everyone know about another awesome ride that happens every year here...
In a message dated 4/30/02 2:32:20 PM Mountain Daylight Time, ... remember to take the magnet off of the pan and clean it. There will be a bunch of "gold...
Best case scenario: weird linkage problem. But, typically it means your soft parts/torque converter are saying goodbye. You might be able to limp it along,...
Andrew..Saw your thread re: breaking out the rear window..I recently found that the rear glasses are no longer available..Thought another list member might be...
Frank Donnelly
frankdo@...
May 1, 2002 5:58 pm
25061
Andrew: Just had another thought about your chop job. Please post the exact vehicle you are chopping the top off of as I could really use another part off it,...
Frank Donnelly
frankdo@...
May 1, 2002 6:12 pm
25062
Hey, it's the top off an '88 Grand Wagoneer and if anyone needs a roof rack or glass or door internals let me know. -Andrew http://rrr.n3.net ...
Andrew: Thanks for response..Tell ya what I was hoping for...I need a tiny section of the roof..About 8" x 8" ...I need the very RIGHT front corner of the roof...
