Hello Jay, I have a glove box door on my '62 PU that has the lock and hinges but nothing for the lock to catch on. I also have a small loop that needs to be...
yeh yeh yeh, another candle on the cake. another ache and or pain, another idiot wanting money for this and that. and yet, another freind evrey day. jim in...
I'm trying to put a heater in my 64 van. I'm using a 66 heater. The defrost duct off the heater hits the windshield wiper motor. Do I use a different wiper ...
Marv in WI, I know it is a '62 so probably an unpadded door. But it is possible you might be changing to the other. That's why I need to know for sure. Lee, in...
Will, I don't remember the reason, but it won't work in the upper holes. I think the linkage arm hits the inside of the nose. You can use either the earlier...
Marv, I'm working with Lee to get all the pics and templates posted, including the holes for the loop. I drilled two holes in the tab on my '61 with an...
Will, I had the same problem. I used a bracket and arm from a 65. From what I remember just the bracket and arm are different. The bracket rotates the motor...
Thanks,all... Anyone have a 65-67 wiper motor with needed parts here in So.Cal ? Will in Whittier,Ca. 63 Econo PU, 64 Econo Van 64 Fairlane 4 Door 75 Jag.XJ6L ...
I hear ya Jim, I hear ya.... Jim in WI ... yeh yeh yeh, another candle on the cake. another ache and or pain, another idiot wanting money for this and that. ...
It seems to be a trend around here- but it looks like you're right Jay. :) I have a couple neighborhood mechanics, and one of them was kind enough to re-route...
Tony, I run electric pumps on my two V8 Econolines, and on my '66 Bronco (200 six). Been doing so for over twenty years now. I tried several of the aftermarket...
Jay could you elaborate on the 6 volt coil and the "S" terminal on the alt...for me...potato head style? This sounds like a good set-up but don't really ...
Will, I'll give it a try. Let me know if you need more info or a diagram. First, the pump needs to be from a carbureted model, which I believe rules out the...
jay, Couldn't you eliminate the need for a by-pass "priming" switch just by first turning the key to the ON (run) position, waiting a few so the carb fills,...
If I understand Jay right, the motor has to be running for the alt to give the relay a charge and turn on the pump...Lets see if I know what I'm doing...LOL ...
Lee, that's exactly how you *don't* want it to work! As Will says, you only want the pump running when the engine is on. The reason is that if you get in an...
Lee, I sent you (and the group) a message detailing my problem. I will appreciate a template very much. My door is unpadded. My address is: Marvin Hoerig ...
Made new patterns today to show everything everyone needs; the cut outs and all the mounting holes, including for the cable. They are not perfect but with a...
Lee, It is a '62 PU. The glove box door is not padded. It is mounted in hinges and has a working lock. Unfortunately, there is nothing for the lock to...
Jim, If you bend the diamond plate down around the edges that 90 degree bend on the edges will add significant strength to your floor. I have seen car...
Hi All, I have seen some references to the rear seats in the past. I would like to locate at least one of the seats for my my 65 wagon. Preferrable the forward...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
