My quick release backrest and bags are installed. I can grab the backrest and take the whole kit and kaboodle off with one move. Pictures to follow. -bj...
Phil Ward up in Mn. I think he is doing it through John Jones shop. Neat set up.. Pictures on the R.B... He went with an Italian rim. I think.. Jumper...
Thanks; I'll have a look. It looks to me like I'd probably have to do some cutting on my swing arm... Please note: message attached [Non-text portions of this...
Spent two days cleaning and polishing Red Hot Chili Pepper and changing her brake pads. My son's driving down for the four day weekend from Ft. Jackson where...
That sounds like fun, but dont lit him talk ya into taking it back to Ft.Jackson. Have fun Brother john. __________________________________________________ Do...
We had fun, Got rained on once. He got to try the X and liked it better than the Wing (He rides a HD dresser), but never twisted the throttle over a third...
Has anyone come up with proper fitting LED inserts for front turn signals/running lights, rear turn signals and tail light? If so, please respond with make...
I used flat panels made for Harley and cut them to fit. I have 48 LED's in each signal and 96in my taillight (Tombstone panel). -bj Please note: message...
Someone (Storm?) has a 29 tooth drive sprocket. I need to know which sprocket he used and what modification it needed. I also need to know which narrow HDbelt...
What are the temp range parameters---starts up at 170 at low end and ends up at 230 at high end in 10 degree increments depending upon where one sets it ???...
I have the switch set to close contact and turn on the fan when the oil temp. reaches about 170-175 deg. The Switch is reading outside air temp. not oil temp....
I bought the switch from a air conditioning/ refrigiration parts house, you can also find them at Granger. Suprx443 ... better---and ... the ... far ... town ...
It's in the seventies and sunny today. I'm going to ride my X to Golden Corral where I'll eat five plates of food for five dollars. The trip should be good...
Has anyone found a proper(tapered roller) set of steering neck bearings w/housings, that will fit the X?? Even a set close enough to modify by turning...
Mark.. Go to Tinkem's web site. Look for spec's on the neck bearing (6205? 6305? ) I think the cross ref. will be a "3205" .. Or somewhere along those lines......
