... with water injection. Water injection off he made 368 hp with water injection 377. We were expecting better then this hopefull the same numbers as 100...
This groupbuy I tried to organize didn't get up and go like I planned. There is another one going on at dsmtalk.com. Please go there. Here is the link (don't...
I hope this isnt too bad of a newbie question but if water/alcohol skews your O2 sensor readings how does one go about "properly" tuning? When I'm tuning the...
In my experience, the O2s aren't affected that much and I run 50/50 mix methanol/water so I think initial tuning with O2s is OK. This info is based on my 97'...
I'm a lazy bum and installed the jet and wire work like 6 months ago. The jet is installed onto the TB elbow. I just have not installed the pump and tank in...
I forgot about sending you that WI information http://membersites.namezero.com/jogauthi.nmu.edu/gi/wi.htm its a nice system... Grant Davies THE RESIDENT ALIEN ...
Take a look at the chart here: http://www.aquamist.co.uk/sl/plist/pic2/806-052/806-052.html Does that mean that with a .7mm nozzle on my 1s system, my aquamist...
I am going to be mounting my shurflo pump in the spare tire well, stock washer system is still intact. I want to avoid drilling holes on the car, can you...
... is only putting out 6.5 bar, or about 95 psi? << Yes. But why say 'only'? 95 psi is way more than you need to thoroughly atomize your spray. ... nozzle,...
Martin, You are on the right track, but may be having trouble with a couple of things. First, if you have any size of wire at all, and you are pumping while...
That is just a jet flow chart. Let's say your pump is 100 PSI (7Bar) and you're running 1 Bar of boost. the differential pressure is 6 Bar, therefore your...
I was told by a reputable Aquamist distributor that the Aquamist pump can only support up to the .8mm to .9mm nozzle so you really couldn't or shouldn't run...
Paul, You too are on the right track, but I think you may need some help with what flow does to pressure with the Aquamist pump. It appears that you feel the...
Ok thanks for all the responses, I think I am more cornfuzzled now than before I asked the question. I have heard 4 different people give 4 different answers....
Hi Terry, ... jets based upon what the chart says for one jet at a time. This isn't going to happen. The wimpy pump is unable to keep up and will reduce...
... pump chemical and is probably overkill for our applications<< Or, I think this one can be used equally well. Nice thing is , it costs less than $100, and...
... said before, I hooked it up to the hose without jet and fired it into my driveway (had to watch out for the recoils) You will have no doubt to convince...
I have the aqumist pump with a .05 jet it has about 180psi all the time with a 1 jet it is about 90psi and with 2 1jets it is about 40 psi. I have a...
Here's a site I just found which has some amazing information on water injection. Namely, his testing found an avg 150 degree F drop in temp across a...
... with a 1 jet it is about 90psi and with 2 1jets it is about 40 psi. I have a acumulator and run 2 1jets It will go for about 40sec above 100psi and than...
... wrote: But as you say, the Aquamist pump creates about 10 to 20 times ... expect the ... making near ... fluid ? ... someone can ... and spray ... all the ...
I think i have seen this one...it looks like they stick the thermocouple directly after the injection of water..... i guess that would really cool the...
cummins24vpwr@...
Oct 20, 2002 6:28 pm
1548
... Good topic, I'm normally just lurking, but I've been wondering about a couple things concerning the shurflow pump. I have a 60 psi pump, I'm assuming it's ...
I've emailed shurflow, and yes the pressure is adjustable. I'm currently using a shurflow accumulator, and the setup is working quite well. It includes a...
The 60 PSI pump is what people have been using, and then one day someone realized there was a 100 PSI version. You will still get good atomization, the flow...
Actually Jeremy I think the 60psi is a bad idea, if you read Shurflows docs on how it works pressure wise it can let the pressure drop to 20psi before it turns...
... someone realized there was a 100 PSI version. You will still get good atomization, the flow rate thru the jets will be lower due to the pressure. No big...
... with the exception of the pressure switch setting, is there anyone that might know for sure? I'm pretty sure there's more to it than the pressure setting;...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
