I will be at the Goodguys show on 11/11 in Pleasanton CA. This time Im taking my 65 Caliente to the show and shine.... Anybody else going to make the show?...
Jay Try this website and this book. You can bypass the carb with the heater hoses. I have not tried it (I like to keep original) but I have read that it can...
have you tried AutoKrafters or any of the other Ford parts places??? rod ... _________________________________________________________________ Buy, Load, Play....
I know were a 60, 61, and a 63 V8 are. All three are for sale in So Cal. The 60 and 61 are in need of full resterations, they have been sitting in the desert...
Most folks remove the heater hose as soon as they see it. No, you don't need the pre-heater in most cases and removing it should make the car run better and...
Hi Cometeers, I'm wondering if the aftermarket fiberglass hoods can use the existing springs and locking system...or is it the pins without hinges. Just...
I am told by others here that this part is not being reproduced. If anybody knows differently......... ... places??? ... comet ... crazy ... need ... Thanks. ...
Hi Gang, Years ago I purchased an extra-row heater core. I still get no heat. If I really flush the system, there's a tiny bit of heat, almost nothing. I'm...
Possibly the seals around the core itself to heater body are missing. Same for heater doors. I use thin foam and spray glue to reproduce the door and vent and...
Just completed the swap from Drum to Granada disc for the front of my 63 ragtop. The installation was fast and clean. Ready to take the car to alignment shop...
Had the same exact problem this summer with my '64 Comet. Turned out to be the brake light switch (which is attached to the master cylinder) had a short in...
I can tell you that the factory fiberglass hood on my '66 hinge springs are a lot lighter than that those used with metal hoods. John San Francisco '66...
Do not!!! connect wires for brake switch to the prop valve. Now we know you have continuity that means the prop valve is set rear or fwd and not centre as its...
I did look at the online AK catalog and there wasn't one listed.... ... _________________________________________________________________ Say hello to the next...
I did look at the online AK catalog and there wasn't one listed.... ... _________________________________________________________________ Not only does Windows...
m, are you sure you are getting flow through the core??? do the hoses get hot?? if you by-pass the heater core and loop one of the hoses, does that hose get ...
Lee, I took a look and don't have any taillight bezels, sorry. rod ... _________________________________________________________________ Not only does Windows...
Did you use an aftermarket prop valve? If so, where is the brake light switch in reference to it? Prop valve is best if placed AFTER the brake light switch, if...
Lee, I have taillight bezels, but the chrome's not that great. I can send you a picture. Rod, I'm maybe interested in the red interior stuff. John San...
The fiberglass hoods use a much lighter spring. Not sure if anyone sells aftermarket repos. Check with Dearborne and AutoKrafters. Every now and then a set...
Jerry If it would not be to much of a hassle could u send me a sketch showing me how this is layed out....I'm confused to the max on this...I'm just not seeing...
does any one out there have a good red rear seat for a wagon i believe 61-65 will fit i am just trying to get some thing closer to my cloth red front seat...
