Working only on logic, I checked the coolant level upon uncrating, there was none in the overflow recovery tank, and the radiator cap hole was low. I added to...
Donald, What I did on my coolant system was to drain it as best I could, refilled with water, drained again, I kept doing this until no greenish color was...
Uh, I wouldnt put my SS# on anything I did have to... If a thief will steal your scoot, they wont have a problem stealing your identity. angletontruckdriver...
Uh, I wouldnt put my SS# on anything I did have to... If a thief will steal your scoot, they wont have a problem stealing your identity. angletontruckdriver...
Uh, I wouldnt put my SS# on anything I did have to... If a thief will steal your scoot, they wont have a problem stealing your identity. angletontruckdriver...
The Tanks come with an alarm, so I didnt have to deal with that. I too added a cig lighter. I put mine under the seat though, with a long cord. That way I have...
Inner tube??? Not on any scoot I have owned. Your scoots odometer is probably in kilometers, BTW. Around or about 500km, you will see how much you scoot...
Hopefully the thief will not take the scoot apart and anyone that works on it will report it to the police to see if was stolen. If not SS # then could use...
Call around to your local auto wrecking yards also some (not all) handle cycles also and if they do not handle cycles they might know who does. A very old...
The main reason I built my own alarm is, if a thief knows the alarm he can defeat it--on mine a thief would not know its weak points or how to quickly bypass...
Why not just put in your phone number. Anything past that invites trouble. As far as them taking them apart... they DO. That's why they call them chop shops....
Myself I have had the same telephone number for years but that does not mean I will have the same one next year. One of my neighbors has had about 5 different...
You are correct, the tire itself says tubeless, just has a brass valve stem that fooled me at first. I actually like that, easier to find the leak and the...
Another defect I found by accident today (Roketa 250), is that the steering head is quite loose, probably contributed to the loose feeling when doing a...
Donald, I think I found the info you need go to Stan's articles of the repair of the 250 cc scoots and go to Honda Helix manual go to Chapter 14 and I think it...
Thanks, that is pretty much what I was expecting. I had just now found the Stans site, lots of great stuff there! ... repair of the 250 cc scoots and go to...
What I have done is create a folder on my desktop and have copied most of what Stan has posted on the repairs--It has come in handy-- The thanks go to Stan for...
HA HA HA HA, One of the first things I did to my scoot, was cover up the round ugly spot on (mold flash) the top of the trunk. I went to the local Harley...
Sticker and Decal POWER !!! Craig Sparky Alex <viking_warrior_1@...> wrote: HA HA HA HA, One of the first things I did to my scoot, was cover up the...
If anyone is looking for cheap Balance Beads for their scoot's tires whitehorsegear dot com sells "N-Beads" for $9.99 plus $6.00 shipping in 3 ounce size...
Donald, It is a very good thing you found that loose steering, you could have done the same thing that happened to me while riding my KZ650 years ago--a high...
Yeah, it was just one of those things I did NOT check but should have. Heating problem still baffles me, could be a stuck thermostat or water pump not pumping...
I would drain and flush the cooling system and put in some good ole US of A antifreeze (make sure it is for aluminum engines). If what other people are saying...
Look on the positive side--if you change out the antifreeze and it corrects the overheating problem--no teardown--if changing the antifreeze does not correct...
Hi - I have a tank urban racer and have a weird "starting" problem. Squeezing the left brake, to electric start the scooter works only once; (first start of...
This is a common problem. You have a "sticky switch". There are a couple ways of fixing it. One get a new switch. Second (and this works for me most of the...
Do I have to disassemble anything or am I able to shoot the graphite into an opening?? In Chinese_scooter_forum@yahoogroups.com, Phillip Hogan ... couple ways...
First off folks, you don't want to squirt ANYTHING into the brake light switch, it will cause it to short out and blow the main fuse instantly, trust me, I'm...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
