Enter your vote today! A new poll has been created for the Chinese_scooter_forum group: Would you miss getting Sparky's advice, and this forum, if I shut down...
Chinese_scooter_forum...
Jun 5, 2009 3:12 pm
4797
... These scooters, at least the post-2004 models, should be certified to comply with EPA regulations. EPA regs for small engine models (less than 150cc, as I...
Hi again, Well here i am again, still stymied with my tank tk150t-12 that just stopped! I have fuel on the carb side of the filter I have fuel in the line to...
Harve First have you opened carb bowl drain to see if there is any gas in bowl? If not Take to vacuum hose to fuel pump off manifold You can pull a vacuum...
The laws of physics, and the properties of metallurgy come into play here. When metals heat up, they begin to swell and will cause the valves to get tighter ...
I have tried severl times to open up the box to the air cleaner, but their must be either as couple of screws I can not fine or cannot reach. The scooter is a...
Hi All, OK I am stumped on this one. I started to have power issues, in the sense that at times while driving all of the sudden my scoot would start to slow...
Normally the complete box is replaced. At least that is the way with my Jmstars and Lances. "KJ" Cell 701-729-4800 "Good Conservatives always pay their bills....
T, My scoot won't start right now either (hasn't since October). But that's a new problem. Your symptoms sound like the those that I had last summer. ....
Hi Gang, Re: 2008 Roketa MC 54 250 (not "B") I have three questions and hope someone can give some advice. (1) The caliper is rattling intermittently at low...
I am nearing the 6000 miles. Always kept up the oil changes properly, and adjusted the valves once, about 1500 miles ago. Guess that may be my first start...
Almost all performance or hard starting issues are related to valve clearance. I always do a valve adjustment at 600KM and again every 1500KM. 50cc GY6...
Frank, I assume you are talking about you rear brake caliper (from your description). There is normally a rubber bushing that fits around the front mounting...
Yes, I put pegs on my scoot. I brought them from JC Whitney. I simply cut a hole in the bottom panel and bolted them right to the frame. I really like...
Hi Kelly, Actually your scooter is more Chinese than Japanese.....LOL Most of the parts are made in China, of Chinese materials. The Japanese control the Q.C.,...
Uh Oh--we got troubles. I had someone work on the scooter and he tried a fix. The mechanic explained how the fitting had worn just enough for the pin to have...
I joined this forum in hopes of working on my own scooter. Since my scooter was new I changed the oils every 250 miles for the first 1000 miles, I now change...
I have seen similar problems with Chinese metal parts You would have been better off using silicone as a filler that would isolate metal chatter keeping...
My scooter had rolled passed 9600 mi. this morning on my way to work. The engine still runs like a champ, starts every time. I have a feeling the variator...
Just go and get you a caliper and replace it, you can get a caliper for less the $60 bucks, that is what a mechanic will do, so just do that to save money from...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
